Go Back   The Supercar Registry > General Discussion > Chevrolet


Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2014, 08:12 PM
VintageMusclecar's Avatar
VintageMusclecar VintageMusclecar is offline
Senior Member
 
Join Date: Jul 2003
Posts: 3,366
Thanks: 158
Thanked 161 Times in 46 Posts
Default Hello, old friend

My old Pro Street `67 Chevelle is back on the market.

http://www.collectorcarnation.com/Chevy/...wSuperSize=true

Many memories here....
Reply With Quote
Attachments - The Supercar Registry TFC.jpg PT2WOB.jpg PT1.jpg PSR.jpg
O Garage vBulletin Plugins by Drive Thru Online, Inc.
Click here to view all the pictures posted in this thread...
  #2  
Old 03-09-2014, 08:21 PM
Xplantdad's Avatar
Xplantdad Xplantdad is offline
Moderator
 
Join Date: Sep 2004
Location: AZ
Posts: 32,388
Thanks: 7,439
Thanked 5,346 Times in 1,875 Posts
Default Re: Hello, old friend

Cool!
__________________
Bruce
Choose Life-Donate!
Reply With Quote
  #3  
Old 03-09-2014, 08:50 PM
jimbo jimbo is offline
Senior Member
 
Join Date: Jan 2003
Location: Detroit
Posts: 229
Thanks: 0
Thanked 1 Time in 1 Post
Default Re: Hello, old friend

What is the white tank in the trunk?
Reply With Quote
  #4  
Old 03-09-2014, 08:57 PM
VintageMusclecar's Avatar
VintageMusclecar VintageMusclecar is offline
Senior Member
 
Join Date: Jul 2003
Posts: 3,366
Thanks: 158
Thanked 161 Times in 46 Posts
Default Re: Hello, old friend

Not sure, I think it might be an alcohol/water injection system to supplement the blower. When I sold it the 496 was just carbureted, the guy who bought it from me added the blower and a bigger cam.
Reply With Quote
  #5  
Old 04-22-2018, 12:53 PM
VintageMusclecar's Avatar
VintageMusclecar VintageMusclecar is offline
Senior Member
 
Join Date: Jul 2003
Posts: 3,366
Thanks: 158
Thanked 161 Times in 46 Posts
Default

She's back on the market again, this time in Florida.

https://www.facebook.com/groups/9457...66965314&rt=11
Reply With Quote
  #6  
Old 04-24-2018, 04:25 PM
A12pilot's Avatar
A12pilot A12pilot is offline
Yenko Advertising Member
 
Join Date: Nov 2014
Location: DFW
Posts: 2,687
Thanks: 0
Thanked 4,575 Times in 1,136 Posts
Default

Well, Eric. There has to be one cool story with that beast to share! Do tell......

Cheers
Dave
Reply With Quote
  #7  
Old 04-24-2018, 11:18 PM
VintageMusclecar's Avatar
VintageMusclecar VintageMusclecar is offline
Senior Member
 
Join Date: Jul 2003
Posts: 3,366
Thanks: 158
Thanked 161 Times in 46 Posts
Default

I have more cool stories about that car than I can count--unfortunately I also have some very UNcool stories as well. I had a very bittersweet relationship with that car towards the end of my ownership--through no fault of the car itself of course.

I'll write up a post a little later.

I'll say this much; I had good reason to sell it when I sold it, but I sure do miss that car. There's only one car I miss more--my very first `67 SS396 Chevelle--and the stories do overlap somewhat.
Reply With Quote
  #8  
Old 04-25-2018, 02:19 AM
VintageMusclecar's Avatar
VintageMusclecar VintageMusclecar is offline
Senior Member
 
Join Date: Jul 2003
Posts: 3,366
Thanks: 158
Thanked 161 Times in 46 Posts
Default

I purchased this Chevelle back around 1991 or 1992. I found it in our local "Tradin' Post" classified newspaper. It was black on black, and it had a very mild (flat tops, stock 1.94 461's and a COMP 268 High energy HFT cam) 327 with a QJet on an OE iron intake, a Saginaw 4 speed and a 12 bolt with 4.10 gears.

I beat on it pretty hard and the Saginaw quickly met its fate. I replaced it with a wide ratio Muncie that I also found in the Tradin' Post.

I took it to the track once as described above, the only concession being a pair of M&H street & strip L60 tires. With the headers uncorked, it ran surprisingly consistent 13.80's @ ~102 mph. I made 3 or 4 passes with it that day, each time lining up against a stranger in a Roadrunner with a 383 Magnum and a 4 speed. Each time I'd get the RR through the first 3 gears, but as we each went into 4th, he drove from just behind my door to a fender in front of me each time. I believe he ran 13.60's. As we were getting ready to leave, he came over to see what I had under the hood. He was quite surprised to see a small block with a QJet on it, and complimented me on how well it ran.

Note that I had my trusty ZEMCO timer in the car at this time--more on that in a bit.

Soon after I got the big block bug, and I wound up putting together a stock bore 454 with a set of LS6 11-1 pistons I purchased from a friend's dad (he was running a real deal LS6 in a `68 Camaro bracket car and had just pulled it down to warm it up more). I hung them on a set of 7/16" dimple rods that I also got through (you guessed it) the Tradin' Post. Everything went into a cherry low mileage 454 2 bolt block, along with a stock steel crank. I had Erson grind me a custom roller cam (my very first custom cam), found a set of square port closed chamber heads (yes, the Tradin' Post) and a factory dual plane intake. I don't even remember the casting #'s on the heads or the intake. I plopped a brand new 4781 850 Holley on it and added an HEI distributor.

I knew the Muncie wouldn't be long for this world with that big block in front of it, so I had a buddy build a 400 Turbo and connected the two with a B&M 2400 Holeshot converter (poor choice, but I didn't know any better at the time). I also had the exhaust upgraded to 2 1/2" at the time, but it didn't have tailpipes on it, just turn-downs. I don't even remember what mufflers I had on it--Flowmasters maybe?

I drove this one to the track, eventually running 11.90's @ 112 through the mufflers--pretty good for the time. I later bolted a 150 HP Nitrous kit on the car, but I only got to run it a few times on the street. The car would run 12.20's with the Goodyear Eagle GT's on the back and 11.90's with the M&H's on nuts. It ran high 10's on nitrous on the M&H's on a couple of clandestine late night tuning sessions, but I never backed that up at the track.

It wasn't long before I lost a valve which laid out the 454. It was around this time that the whole "Fastest Street Car" craze was gaining momentum, so I got the bright idea to give that a go.

Pfft...bad idea.

Since I wasn't made of $, it took me several years to gather up the parts and get my new engine built. I scored a killer deal on a Mark IV Bowtie block still in its crate. I bought a Callies 4.5" crank, some Manley 6.385" long H beams and had a Hawkins Speed Shop in Richmond Indiana order me a set of custom J&E flat top pistons to complete the shortblock. I ran a Crane R274 roller cam and a set of Dart 360 heads. I bought the heads as a bare kit from Doug Herbert and had a local machine shop machine & assemble them for me. Little did I know at the time that the local shop completely F*&KED me on those heads, but as the old saying goes, live & learn. I topped it off with a Weiand Team G intake and a 9377 1150 Holley--again a poor choice, but I didn't know then what I know now about carburetors. A Moroso street/strip pan completed the bottom end.

We ran it on the dyno at Hawkins, and I quickly found out that the valve springs that came with the heads--while having the correct "specs" to match my cam--were junk. They died on the 4th or 5th dyno pull. I also found out that I couldn't get enough jet in the 9377 to cure a lean mixture above 6K. The engine still made over 700 HP at only 6000 and 730 lb.ft at <4K, but since the springs were shot and I couldn't get enough fuel through the carb, we called it a day. I took the engine home and set it in the car. Next I started to re-do the rear suspension and tried to install some 30X13.5 ET Street M/T's. Realizing this wasn't going to happen with my fabrication skills, I had to come up with a plan B.

Shortly afterwards I came into some $ unexpectedly, so I shipped the car over to Hawkins and had them install a complete back half with an Alston 4 link. The rear was a junkyard Dana with a 3.70 gear and a lock-rite diff. They also installed the 8 point cage and re-worked the 2 1/4" Tubular Automotive headers I'd bought for the 572 install.

I got the car running shortly after I got it back from Hawkins. I'd already replaced the valve springs, but the carb was still stock and I still had the Team G intake on it.

I sent the carb off to Pro Systems and had Patrick set it up for the build. I have to give credit where credit is due--while the car was stupid-fast with the stock carb, it was notably more stupid afterwards. The first time I turned that car loose it scared the sh*t out of me--2nd gear pulled harder than anything I'd ever ridden in -or on- to that time. With the proper valve springs on it the engine now revved to 7K in an instant.

This all took me ~3 years to complete. By the time I'd "finished" the car, the rules for the classes I wanted to try to run had completely changed, and the car was already obsolete.

Again, live and learn.

I drove it on the street for a while, scaring the crap out of a few friends with it, but I was still so disgusted by the whole rules thing that I honestly lost motivation to do much with it. After considerable prodding by some friends, I finally broke down and set a date to take it to the track. The day before I planned on taking it to the track, I attended a local cruise-in with it. Shortly after we left the cruise, the engine started making a hell of a clatter and had a definite dead miss. I pulled it into a nearby as station and shut it off. I took a quick peek under the hood and didn't see anything obvious, but a quick re-start confirmed something was terminally wrong. I called a buddy with a tow truck and had it drug back home.

I pulled the valve covers off and found the #1 intake rocker was sitting sideways. At first I thought I'd dodged a bullet, but when I looked down inside the lifter valley, I noticed the lifter was sitting cock-eyed in the bore.

I pulled the intake off and found the roller lifter had lost its wheel. Upon closer inspection I noted a significant gouge in the cam lobe as well. Since a cam swap on a `67 Chevelle can't happen w/o removing the grill, I decided just to pull the engine. Good thing I did too. A chunk of the broken lifter had wedged itself between a counterweight on the crank and the bottom of the wrist pin boss in the #1 piston, which left a nasty gouge in the pin boss and a notably sticky wrist pin. As I'd neglected to order any spare pistons when I first built the engine (again, live & learn) I had to place an order for 4, the minimum quantity.

By this time I was doing some subcontract work at another speed shop in Middletown. They had a direct line with Dart, so I made arrangements and sent my heads in for a full race CNC port job.

To make this long story short, I got the engine back together a couple months later. I had it running for maybe 15 minutes when it lost the head off #4 intake valve as I was setting the timing in the driveway. Talk about a sickening sound.

I pulled it back apart to find a small gouge in the cylinder wall and another set of damaged pistons thanks to the shrapnel that got pumped through the intake.

That was all she wrote for me. I cut my losses at that point and parted out most of the 572, except for the connecting rods, timing cover, rockers, the carb, and some other misc. peripherals. I put together a much milder flat tappet 496 to go back into the car. This one had a Scat crank, the Manley rods out of the 572, a set of shelf SRP pistons (10-1) a Canton oil pan, a set of AFR 315 CNC heads I found on eBay, and a Dart intake. The cam was the same grind flat tappet I'm using in my current 496 in my Chevelle now, Crane # 131311.

I got the car back on the road, but by this time I was pretty much over it. The 4" exhaust had the cops watching me like a Hawk, the `cage was a PITA to climb over, and it rode like a log wagon. That's when I decided it was time to let it go. I put it on eBay, but it didn't meet reserve. One of the bidders contacted me after the auction was over and we came to an agreement. ~2 weeks later I drove it to a local gas station parking lot at around midnight and watched it get loaded onto a car carrier.

Broken-hearted? Yep.

Disgusted? Yep.

Sad? Yep.

I started searching for my next project car, and this is when I inadvertently wound up finding the whereabouts of my very first `67 SS396 Chevelle. You can read about that tale here.

The guy who bought the car wound up having Patrick build a new 1050 Dominator for the car, and he had the rear gears swapped to 4.56. At his local track, the car ran 6.50's @ 112 MPH in the 1/8, which roughly equates to 10-teens--but that 112 mph @ the 1/8 translated to ~136 in the quarter, so the car had 9's in it as it sat, he just never found them. Instead he pulled the 496 apart, shoved in a giant COMP roller cam and added the Vortec blower. The car ran 5.50's @ 135+ in the 1/8 after that, which equates to mid 8's at 160-ish. The last time I looked there were still pics of the car on Vortec Supercharger's website.
Reply With Quote
The Following 3 Users Say Thank You to VintageMusclecar For This Useful Post:
markinnaples (04-25-2018), markjohnson (01-18-2020), Yann (04-25-2018)
  #9  
Old 04-25-2018, 02:42 PM
markinnaples markinnaples is online now
Senior Member
 
Join Date: Jan 2006
Location: Naples, FL
Posts: 4,637
Thanks: 21,537
Thanked 1,364 Times in 662 Posts
Default

Great story.
__________________
1968 Camaro Ex-ISCA Show Car
John 10:30
Reply With Quote
  #10  
Old 04-25-2018, 06:10 PM
BJCHEV396's Avatar
BJCHEV396 BJCHEV396 is offline
Yenko Contributing Member
 
Join Date: May 2008
Location: NEPEAN,ONTARIO,CANADA
Posts: 3,581
Thanks: 359
Thanked 739 Times in 566 Posts
Default

Quote:
Originally Posted by markinnaples View Post
Great story.
X2! Thanks for sharing Eric.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.