Re: Lakewood roll bar
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 396L35</div><div class="ubbcode-body">Do you have the front part that swings away? I found a complete one about 2 months ago with the 4th bar but I thought someone might have added it.
</div></div>

No Mark, mine does not altough I have seen several over the years that did. There is a 69 Camaro in Murray,KY buried in storage that has the swingout bar still intact.


Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Lakewood roll bar
 

Chapman Race Cars out of Ilinois made an identical foam covered roll bar.

Everybody copied everyone else products back then.

Re: Lakewood roll bar
 

Here are picture of the roll bar and the foam

Re: Lakewood roll bar
 

I have a 3 point red lakewood bar out of a 69 chevelle.
if any one needs any info or pix i will post them.

Re: Lakewood roll bar
 

That would be great. The pictures of the mounting kit will help the chevelle guys out [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]



Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Lakewood roll bar
 

Here are the pictures of the swing away bar for a 69 Camaro.
http://i7.photobucket.com/albums/y29...5/DSC_0893.jpg
http://i7.photobucket.com/albums/y29...5/DSC_0894.jpg
http://i7.photobucket.com/albums/y29...5/DSC_0897.jpg

Re: Lakewood roll bar
 

Anyone out there got one that will fit in 1970 Nova the one that was bolted in mine was one of the things that was missing still have the holes drilled for it in the floor do they fit same car or fitted so they interchangable?

Re: Lakewood roll bar
 

Barry, read back through this thread. The roll bar is the same but the mounting kits were different for different cars. Barry, can you take pictures of the holes drilled in your back seat area and your rockers and post them please? Thanks [img]<<GRAEMLIN_URL>>/burnout.gif[/img]

Barry, what was that gear ratio you have in that 70? You told me a few years back. I think you said it was a ratio discontinued many years ago. I had been trying to remember but couldn't

Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Lakewood roll bar
 

513 gear ratio

Re: Lakewood roll bar
 

Barry sent me these photos of his 70 Nova. Still waiting on the pic of the back seat area bolt holes.

http://img.photobucket.com/albums/v2...G_0003_NEW.jpg

http://img.photobucket.com/albums/v2...II/IMG_NEW.jpg


Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Lakewood roll bar
 

Thanks Tommy for putting the pictures on for me of the floors where the roll bar was attached with the original holes I just can't figure out how to post pictures on here as soon as roll bar gets delivered this week Mike will sit it in body and send me pictures to post here for you to look at before he cleans bar up to paint it then I have to find right size Lakewood decal to put on it after he gives me the size of the decal.

Re: Lakewood roll bar
 

Found this one on Craigslist.


http://img.photobucket.com/albums/v2..._IMG953044.jpg


Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Lakewood roll bar
 

Copied these from a thread in the Pit area. I had forgotten about seeing this Nova in that thread. Sweet!!

http://i121.photobucket.com/albums/o...can0002-13.jpg

http://i121.photobucket.com/albums/o...can0003-12.jpg

http://i121.photobucket.com/albums/o...scan0006-8.jpg


Tommy [img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Just found this old thread and you gotta love that little Nova. Great pics Tommy.