![]() |
Lakewood Scattershield NOS Hardware - Wanted
Searching for NOS Lakewood Scattershield hardware. What is unique to the Lakewood product line is that the bolts that hold the bottom inspection cover have "LE" markings on the heads. Although the package indicates "Chevrolet" all the bolts are the same for Ford etc. The only real difference is the quantity.
Looking for original hardware for period correctness. Thanks! https://www.yenko.net/ubbthreads/pics...wood_bolts.jpg https://www.yenko.net/ubbthreads/pics...od_bolts_1.jpg https://www.yenko.net/ubbthreads/pics...od_bolts_2.jpg |
Re: Lakewood Scattershield NOS Hardware - Wanted
Contact 67NovaBoy Dave on the Site. Also (GTO DON) Donny White.
|
Re: Lakewood Scattershield NOS Hardware - Wanted
If the guy's Sammy suggest do not have it let me know I have a large assortment of LE Hardware https://www.yenko.net/ubbthreads/pics...4_12.59.35.jpg
|
Re: Lakewood Scattershield NOS Hardware - Wanted
PM sent.
|
Re: Lakewood Scattershield NOS Hardware - Wanted
Try calling California Speed & Sport here in NJ. There's a good chance they still have those blister packs on the wall. 732-545-0311
Verne |
Re: Lakewood Scattershield NOS Hardware - Wanted
Thanks for the lead.
|
Re: Lakewood Scattershield NOS Hardware - Wanted
Searching for grade 8 bolts zinc plated with or without the yellow dichromate finish that have the Lake Erie "LE" manufacturer's identification on the head of the bolts that were used on vintage Lakewood scattershields. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]
Sizes needed are 3/8" - 16 X 1/2" in length (quantity 12) and 1/4" - 20 x 1/2" in length (quantity 6). |
Re: Lakewood Scattershield NOS Hardware - Wanted
The Lake Erie "LE" hardware that is currently available is slightly different than the hardware prior to 2008. Current hardware has "USA" embossed along with the Manufacturer's "LE" insignia.
https://www.yenko.net/ubbthreads/pics...ade_8_hhcs.png Still searching for the earlier hardware for period correctness. https://www.yenko.net/ubbthreads/pics...-lake_erie.jpg |
Re: Lakewood Scattershield NOS Hardware - Wanted
Still searching for the zinc plated grade 8 bolts with or without the yellow dichromate finish that have the Lake Erie "LE" manufacturer's identification on the head of the bolts that were used on vintage Lakewood scattershields. Sizes needed are 3/8" - 16 X 1/2" in length (quantity 12) and 1/4" - 20 x 1/2" in length (quantity 6). Thanks! |
Re: Lakewood Scattershield NOS Hardware - Wanted
My search for the Lake Erie "LE" hardware is proving to be a challenge. [img]<<GRAEMLIN_URL>>/3gears.gif[/img]
|
If you're still looking I picked up about a dozen or so 3/8/16 early style Le bolts grade eight
|
I believe i have a new pack ill check when i get home from work and get back to you
|
Lakewood bolts
2 Attachment(s)
These are the ones I have let me know if you want them
|
Pm sent
|
FYI - the ones in the picture above are grade 5 bolts.
Kent |
Thanks to the generosity of our members I received some hardware. I would like to locate a few more bolts. I am sure the hardware is out there, either in its original Lakewood packaging or in bulk quantities from the original Lake Erie manufacturer.
Thanks! |
Btt
|
|
Yes, I have seen that type of hardware. The hardware being being supplied by Mr. Gasket was slightly different. I would like to find the period correct (67-69) Lakewood hardware if possible.
I am sure it's out there. It will eventually surface... |
Still searching......
|
Btt
|
1 Attachment(s)
I took apart a BBC engine today that has these markings on the headbolts. If you can use them let me know.
Jason |
The sizes needed are 3/8 - 16 X 1/2 in length (quantity 12) and 1/4 - 20 x 1/2 in length (quantity 6). The 3/8 bolts are used to secure the removable lower inspection plate on the scattershield and the 1/4 bolts are used to secure the bottom lower edge of the Lakewood scattershield to the corresponding block plate.
What are the sizes and lengths of the bolts you have? My assumption is that they are the wrong size and too long. |
Yes, they are the wrong size and too long.
Jason |
My search continues.....
|
http://i1300.photobucket.com/albums/...psvo4caalj.jpg
These work? they are unused and gold zinc 1/4-20 1/2" long Scott |
Yes....not only looking for a few other 3/8 - 16 X 1/2 in length but 1/4 - 20 x 1/2 in length (quantity 6)......perfect!! :D
PM sent..... |
|
Perfect....PM sent :)
|
Hardware successfully found! :)
|
1 Attachment(s)
Acquired enough bolts for one build. Still searching for bolts for one more Lakewood scattershield. The bolts are 3/8" - 16 X 1/2" in length (quantity 6) and 1/4" - 20 x 1/2" in length (quantity 3); grade 8 bolts with the "LE" insignia.
I appreciate everyone's effort to date.....Thanks |
Still searching...Thanks!
|
I am sure the hardware will surface sooner or later.
|
Still searching for a few more bolts; 3/8" - 16 X 1/2" in length (quantity 6) and 1/4" - 20 x 1/2" in length (quantity 3); grade 8 bolts with the "LE" insignia.
Thanks! |
Btt
|
All times are GMT. The time now is 03:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.