![]() |
DANA LICENCE PLATE FRAME
There is currently a licence plate frame on ebay.
Although acknowledged as a reproduction it looks nothing like the ones I have seen. Does anyone know if it approximates any of the real ones and which year ??? Hope the link worked if not please check the auction under Dana Chevrolet. I think this is only the 2nd item for Dana I have seen on ebay in many years, https://www.yenko.net/ubbthreads/imag...lins/dunno.gif http://cgi.ebay.com/ebaymotors/ws/eB...tem=2469530529 |
Re: DANA LICENCE PLATE FRAME
Someone posted an Authentic picture of a Real Dana Chevrolet license plate frame not to long ago.It was either from a Road test article in a magazine,or from someones actual car...I believe it was from an actual car found now that I think about it.I remember it was similar to that one on Ebay with ~DANA~ cast into the bottom,and SOUTHGATE on top.The Lettering was in White.Both with a Red Background.The Chrome frame was the same used one in that auction now,as they are still available today.They are General frames cast by a few different manufacturers:Robert W. Brown Co.,& Auto License Frames,both in California.That one on Ebay has the lettering lazer cut into Plastic Laminate.
|
Re: DANA LICENCE PLATE FRAME
Go to the next page in this section and at the top click on Dealer Emblems,page 5 at the bottom.
|
Re: DANA LICENCE PLATE FRAME
|
Re: DANA LICENCE PLATE FRAME
Thanks Astock.You too Chris.. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif https://www.yenko.net/attachments/56483-MVC-030S.JPG
|
Re: DANA LICENCE PLATE FRAME
So what's the story on the car with the original Dana frames and black CA plates?
|
Re: DANA LICENCE PLATE FRAME
Thanks for that. Not only is the seller, selling less than close repros but has decided to turn Dick Guldstrand into a "engine builder" as well. https://www.yenko.net/ubbthreads/imag...s/confused.gif Guess the distance from the Traco shop must have been too far for Dana to travel.
Might as well stuff Chevy racing history while making a buck. (Bondurant was Peyton Cramer's shoe of choice until he flipped his Can Am car ) I love ebay. |
Re: DANA LICENCE PLATE FRAME
Someone paid $89.88 for this One reproduction Frame.
I Suspect we will Start seeing More Famous Dealership names being offered because of this. |
Re: DANA LICENCE PLATE FRAME
Yeah saw it myself, even if it was a correct Repo that's not cheap. Very careful description. He uses the word "detail" but not in relation to the plate. Never says it's a accurate reproduction, just that it is essential to complete the resto of your true Dana.
Wonder if there will now be people running round telling others that this is a "true " repo plate frame. Next it will be this is a "true" plate frame (forget the repro) I think the hobby is getting harder. It used to be a challenge to find the information, now the biggest challenge is to sort the facts from the garbage, with the garbage growing all the time. https://www.yenko.net/ubbthreads/imag...lins/frown.gif |
Re: DANA LICENSE PLATE FRAME
3 Attachment(s)
I am new to the discussion board, but contacted Rob four years ago about my car. I have a sunfire yellow 67 435 horse Corvette coupe Dana apparently kept for their personal use and sold as a "new" used car in 1970. I also have a 67 GT500 and recently found out that Dana was also an authorized Shelby dealership; a friend of mine has a 66 GT 350 that is an original Dana car!
The Corvette's invoice shows it was delivered to Guardian Chevrolet Brea CA. Dana (Mr. G. W. Pickens) issued the Protect-O-Plate in April of 67. The owner listed on the Protect-O-Plate explained he actually purchased the car in 1970, which coincided with the handwritten date on the back cover. The Sting Ray is equipped with California smog, close ratio four speed, 370 rear gear, N11 exhaust, F41 suspension, redline tires, power disk brakes, am/fm, power windows and tinted glass (See Pix). It is a well documented 435 horse car with a complete owner history and its original window sticker, tank sheet, owners manual and Protect-O-Plate. The first owner also told me he replaced the original 427 with an L88! The car still has its original transmission and differential, and I went to great pains to assemble a part number/date code tri power 427 to look like it was never out of the car. The Corvette has been re-painted, but the undercarriage is unrestored and the interior is original except for the carpet. |
Re: DANA LICENSE PLATE FRAME
Very nice Vette. interesting the note on Dana, selling Shelbys, as Peyton Cramer, one of the principals was part of Shelbys Calif team, as was Bob Bundurant (one of Danas drivers at Le Mans.)
|
Re: DANA LICENSE PLATE FRAME
Another interesting piece of Dana/Shelby trivia is the lug wrench used on the 67 GT 500 with the optional Magstar rims. The Mustang wrench for the standard Ford 13/16" lugs wouldn't work with the 3/4" nuts used with the Kelsey Hayes rims, so what do you think ol' Shelby used? You guessed it; he just called his buddy Peyton and ordered a bunch of Corvette lug wrenches! LOL, I've seen the Shelby guys pay $200 for one of these and I think you can still get them from GM for less than twenty bucks!
|
Re: DANA LICENSE PLATE FRAME
Nice vette, That is interesting that Dana also sold the Cobra's.
|
Re: DANA LICENSE PLATE FRAME
3 Attachment(s)
Been meaning to post the Dana frame I had made up for my Corvette. I had a couple extras done to help cover the special run cost and will be running them on ebay. IMHO, much nicer than the ones that are currently available through other sources. Sorry about the high opening bid but the short run and artwork cost me a fortune https://www.yenko.net/ubbthreads/ima...lins/smile.gif http://members.cox.net/detailshop/pi...oDANAframe.jpg
I was at the NCRS regional in Wildwood, NJ this weekend and met a guy from Canada with a blue 65 396 Corvette coupe that was sold from Don Yenko Chevrolet! |
Re: DANA LICENSE PLATE FRAME
|
Re: DANA LICENSE PLATE FRAME
Are the letters raised? Man I also think that they don't look to bad! https://www.yenko.net/ubbthreads/imag...mlins/cool.gif
|
Re: DANA LICENSE PLATE FRAME
Thanks for the kudos!
I wish the lettering was raised https://www.yenko.net/ubbthreads/imag...lins/frown.gif It would have set me back around a grand to have them made up that way and I didn't think I could even come close to covering my costs, so I went with the vinyl style that is very common on dealer plates today. |
Re: DANA LICENSE PLATE FRAME
Joe,
Your Corvette was at the NCRS NJ Regonial this past weekend. I took detailed pictures of your car, including a picture of the license plate frame. I will send you some pictures. There were more Corvettes with License plate frame from hi-po dealerships then I have ever seen. It is certainly a new trend. -Dan |
Re: DANA LICENSE PLATE FRAME
[ QUOTE ]
Joe, There were more Corvettes with License plate frame from hi-po dealerships then I have ever seen. It is certainly a new trend. -Dan [/ QUOTE ] Last year I sold two pair of "Harry Mann" plates for $205.00 (mint, but 1970+ plates) each on ..ebay . Was hoping to get my $20 that I paid back. |
Re: DANA LICENSE PLATE FRAME
As a little of additonal info from a Crammer interview. When he left Shelby, he wrote to Ford to get approval for a Ford dealership originally. From Shelby he took (purchased) a group of six 66 Shelbys (three carry over 66 cars and one of each of the colored cars - green, red and blue - the blue beign an automatic car) Well Ford turned him down and all of the Shelbys were returned into the system (High Performacne Motors - the Shelby processing company) With this allot of odd paper work was created - Shelbys sold to Dana - Dana selling back "used" Shelbys to HPM, then the same Shelbys being resold through other dealerships.
Can't find any record of Peyton selling a single Shelby or Cobra (haven't seen any paperwork indicating he ever got Cobras) Just though I would add a little to the story, been following for about 20yrs..... we own the Blue 66 Shelby |
Re: DANA LICENSE PLATE FRAME
1 Attachment(s)
Thought everyone might get a kick out of seeing the salesman's card my friend found in his DANA Shelby- I'd love to have one of these!
|
Re: DANA LICENSE PLATE FRAME
JOE, THANKS FOR SHARING THE ''SALESMEN'S CARD'', SURE WISH I COULD FIND ONE.....KASEY ... https://www.yenko.net/ubbthreads/imag...iggthumpup.gif
|
Re: DANA LICENCE PLATE FRAME
1 Attachment(s)
You have to have one of these, if your name is Dana.
https://www.yenko.net/attachments/216729-tn_Dana.jpg |
Re: DANA LICENCE PLATE FRAME
Dana...if you didn't know...Kasey has the only Dana Stinger Corvair known to exist at this point.
BTW, killer license plate frame |
Re: DANA LICENCE PLATE FRAME
Thanks, for obvious reasons I have always been interested in Dana Chevrolet. I am only about 20 mins from where the dealership was. I got this frame for free believe it or not. I have some Harry Mann's and Courtesy's. Have always liked stuff like that. I have been chasing a 68 Dana 427 Chevelle. Like Indiana Jones. Have a good night.
Dana |
Re: DANA LICENCE PLATE FRAME
LOOK at what I found today...
Missing something??? http://i64.photobucket.com/albums/h1...ictures002.jpg I matched it up to my frame and its correct. Sad to see the best part missing... https://www.yenko.net/ubbthreads/imag...lins/frown.gif |
Re: DANA LICENCE PLATE FRAME
|
Re: DANA LICENCE PLATE FRAME
Wow! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif It looks like jewelry!
http://img.photobucket.com/albums/v6...ite/Dana_1.jpg |
Re: DANA LICENCE PLATE FRAME
[ QUOTE ]
Wow! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif It looks like jewelry! I wonder if I can convince my wife it's a bracelet? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif [/ QUOTE ] Current bid: US $661.00 Reserve not met http://img.photobucket.com/albums/v6...ite/Dana_1.jpg |
Re: DANA LICENCE PLATE FRAME
Got to be a record amount for a frame! Is this a 70's one and not a 60's? I thought the 60's had white painted letters?
|
Re: DANA LICENCE PLATE FRAME
Do they show the back side??
|
Re: DANA LICENCE PLATE FRAME
Yes, it is a Robert Brown.
|
Re: DANA LICENCE PLATE FRAME
Does anybody else think this looks like a re-chrome? The plating to me looks much more polished than any of my NOS or original plate frames, and the lettering has a rounded off look where the edges of original characters are usually very crisp..
|
Re: DANA LICENCE PLATE FRAME
Steve- your notion crossed my mind too. ("It looks like jewelry") The original owner of my Chevelle took the frame off his car shortly after buying it and stored it in his house. Attached is how it looks 40 yrs later. I don't think it is nearly as brilliant even after clean up ....
http://img.photobucket.com/albums/v6...e/P1110460.jpg |
Re: DANA LICENCE PLATE FRAME
That DANA frame has been highly polished and repainted I would think?
|
Re: DANA LICENCE PLATE FRAME
[ QUOTE ]
That DANA frame has been highly polished and repainted I would think? [/ QUOTE ] Run Forrest, run! http://cgi.ebay.com/ebaymotors/Chevrolet...=item4ceeca5ccd |
Re: DANA LICENCE PLATE FRAME
http://cgi.ebay.com/ebaymotors/ws/eB...#ht_500wt_1182
$696.00 68 bids Over five days left in the auction... How high can this thing go? |
Re: DANA LICENCE PLATE FRAME
maybe this will work:
http://cgi.ebay.com/ebaymotors/ws/eB...m=200584030457 It LOOKS like the real deal old original .... |
Re: DANA FRAME-$1025.00
DANA frame went for a $1,025.00 on ebay, that's more than my Corvair is worth.....
http://cgi.ebay.com/ebaymotors/ws/eB...m=200584030457 Kasey |
Re: DANA FRAME-$1025.00
Wow!!!
|
All times are GMT. The time now is 12:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.