69 camaro rear license plate bracket
 

looking for a rust free ORIGINAL, not NOS, rear licnse plate bracket for my 69 Z28. Thanks!

Tommy M.

Re: 69 camaro rear license plate bracket
 

Tommy I think I have one off the 69 Nova...the same??? it was decent but over in the other shop..if it works let me know and I will check on it over the weekend.. https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: 69 camaro rear license plate bracket
 

I'm pretty sure they are the same. Is there much rust on it? Let me know. Any luck on a 9C 515 voltage reg.? Thanks Bud.

Tommy M.

Re: 69 camaro rear license plate bracket
 

I know of a couple variations on that part, whats the original equipment version look like....does anyone have a picture? Thanks, Alec

Re: 69 camaro rear license plate bracket
 

I know the current GM piece is different than my original... I dont have a pic though.. Thanks.

Tommy M

Re: 69 camaro rear license plate bracket
 

I am working on my 2 rear 69 bumpers now. All the brackets are off. What did you want to see in the pic? I also took stainless carriage bolts and turned them down on my drill press to replicate the look if the rivets for the center bracket. They look pretty good to me, better than the repro ones!

Re: 69 camaro rear license plate bracket
 

I have the whole car bagged in a box, when I lay the stuff out let me look for the reg to, I thought the guys found you one??

Re: 69 camaro rear license plate bracket
 

the difference between the original bracket and the later ones ,is where it bolts on the car,the original is straight piece of metal and the later there is a gap in the metal,

Re: 69 camaro rear license plate bracket
 

would it be possible to get a pic of both pieces?? Sure would like to see the difference. They i can check mine!

Re: 69 camaro rear license plate bracket
 

"NOS" rear license plate bracket

Repo bracket, but correct

Tommy M.

Re: 69 camaro rear license plate bracket
 

ummm Tommy get on your sniper gear and hit that NOS one..looks way to cheap to me.... https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 69 camaro rear license plate bracket
 

Don't do it Tommy.
That first auction,part #344330,is for a 1975 Nova ONLY,nothing else.
It has a U-shaped swinging mounting flange,to contour the lower valiance,different from the one the 1969 camaro used.

The 1969 Camaro used part #3913608,and should have the part no. stamped into the center of the plate backing.The second auction is the design you seek,but is missing the part # stamped into it,thanks to Taiwan.

MANY Vehicles shared the 1969 Camaro License plate frame #3913608:
*1969 Camaro
*1968-71 Passenger
*1968-72 Nova
*1968-72 Chevelle
*1971-77 Vega
And Buick-Olds-Pontiacs all shared this part as well.
I still find these at local swaps for $10.00 or so,depending on their used condition.
They can be found in Junkyards here as well.

Re: 69 camaro rear license plate bracket
 

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4609487121


http://cgi.ebay.com/ebaymotors/original-...sspagenameZWDVW

Re: 69 camaro rear license plate bracket
 

Hey Brian,

Dont you or your dad have any layin' around?? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 69 camaro rear license plate bracket
 

I have an NOS one of the later design for my 78 Nova. Dad probably has one or two laying around somewhere??

Re: 69 camaro rear license plate bracket
 

Yeah, I sandblasted my "NOS" one before I realized it was incorrect. Thanks for the cross-reference list, thatll make it much easier. By the way.. does anyone personally know this "doug-fcmi" that bought that NOS license plate bracket on e-bay for almost $300? I noticed he is a high roller and buys a lot of dated z28 stuff close to my car. Just wondering. Thanks everyone!

Tommy M.

Re: 69 camaro rear license plate bracket
 

The new gm part has the wrong mounting bracket. I used that bracket of my old by removing the rod and spring.Installed the bracket on the gm piece.

Re: 69 camaro rear license plate bracket
 

Tommy have to run for parts all day, will try to check in later tonight, found the lic frame its real and pretty decent normal wear from 69, found a 515 but it says 1119 above the 515
so Jan 11th, 69 right??? and bottom left says 6H not sure if this is saved for my white car or what, it was in the good stash of stuff..gotta burn rubber. https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Re: 69 camaro rear license plate bracket
 

1119515 is the complete part number. 6H is the date code, 1966 H month (August).

Re: 69 camaro rear license plate bracket
 

Is that an NOS bar code too? https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif

Re: 69 camaro rear license plate bracket
 

was not awake this morning...the 515 is off my car...Tommy the flapper is gonna cost ya a case of brews..if you want it.