Re: Canuck and Edgemont Villages new Shop
 

Keep it coming boys. You guys are having too much &quot;fun&quot;!! Makes my project look like a walk in the park!! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: Canuck and Edgemont Villages new Shop
 

Heading into week 2 we made progress on the back wall and prepared for installation of new doors. Our barn roller doors had to be cut down.
http://i285.photobucket.com/albums/l...slakuxmay.jpeg

We had to build out a transom for the front door as we we going with a 12x10 opening to allow the door to open above the cross beam.

http://i285.photobucket.com/albums/l...ps0dbmcaqc.jpg

We started to. Tyvek the back wall the week the doors were being installed.

http://i285.photobucket.com/albums/l...sifgbbjw0.jpeg

Rear door almost done.

http://i285.photobucket.com/albums/l...s8kkkh4rh.jpeg

Re: Canuck and Edgemont Villages new Shop
 

With doors in and the building sealed again we were ready for some inside work, including painting and floor prep.
Wall condition before and after painting.
http://i285.photobucket.com/albums/l...psjt0zpqlm.jpg

http://i285.photobucket.com/albums/l...psoge8d8x7.jpg

http://i285.photobucket.com/albums/l...psienwp0p4.jpg

Derek the painter, no he did not rattle can paint thr inside.


http://i285.photobucket.com/albums/l...squthfbx9.jpeg

http://i285.photobucket.com/albums/l...sno276sna.jpeg


http://i285.photobucket.com/albums/l...snis7aja5.jpeg


Next submission will be about the floor and interior modifications.

Re: Canuck and Edgemont Villages new Shop
 

The last two weeks of March had a lot of moving parts as a lot of interior work was being done:
Electrical routing
Led Lights arrived and installation began.
Floor grinding and application of epoxy.
Drainage

http://i285.photobucket.com/albums/l...sdoslvmrt.jpeg
Test area for floor epoxy
http://i285.photobucket.com/albums/l...ssuhdabyp.jpeg

Filling the divots
http://i285.photobucket.com/albums/l...siqcbmyyc.jpeg

Our cladding for the back wall arrived on Mar 26 and the plan was to have start installing it that weekend. With heavy rain tha last week of March we decided we needed to install a drain. This turned out to be a full weekend project renting concrete cutting saws (we broke the first one)jack hammers and digging through clay that had not been touched in 60 years.
http://i285.photobucket.com/albums/l...pstimytadh.jpg
http://i285.photobucket.com/albums/l...psyrfv9ggg.jpg
http://i285.photobucket.com/albums/l...psbqges8lo.jpg
Drainage pipe in wrapped with cloth and taped.
http://i285.photobucket.com/albums/l...ps184fkxjy.jpg
Add gravel.
http://i285.photobucket.com/albums/l...psjaihi7ed.jpg

Re: Canuck and Edgemont Villages new Shop
 

We made the decision to use LED lights through out the shop, split into a few zones with a dimmer on the high bay lights.

Lighting arrived.

http://i285.photobucket.com/albums/l...psksfgrank.jpg

Going up.

http://i285.photobucket.com/albums/l...psnl8vwbxp.jpg

Bright lights

http://i285.photobucket.com/albums/l...psabjerqzz.jpg

http://i285.photobucket.com/albums/l...pstc80rxxe.jpg

In keeping with a vintage look we also purchased some barn lights, I got this inspiration from Sam Griffiths when he installed a real vintage light in his shop.We went with Edison Style Led bulbs, not a lot of light but great effect.

http://i285.photobucket.com/albums/l...sqwcvjl43.jpeg
http://i285.photobucket.com/albums/l...sx6dr2drp.jpeg

http://i285.photobucket.com/albums/l...psy0ktmpt4.jpg

Re: Canuck and Edgemont Villages new Shop
 

Man, you guys are all in! This is a terrific project and I for one love seeing it come together! Well done! [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

P.S. your electrical handy work looks a tad better than your predecessors! [img]<<GRAEMLIN_URL>>/wink.gif[/img]

P.S.S. Just saw your vintage style lights - glad you took some inspiration from my project - that is what these threads are all about!! [img]<<GRAEMLIN_URL>>/laugh.gif[/img]

Re: Canuck and Edgemont Villages new Shop
 

The first week of April. We had several rooms inside that mended attention, one is being designated the &quot;machine Room&quot;. Home for all buffers, grinders, drill press, hydraulic press. Lloyd called it the Alice in Wonderland room as it wasn't square, plum or flat. It needed new drywall and an Old filled in door that led to the neighbours front lot.

http://i285.photobucket.com/albums/l...ps0zfydtec.jpg

http://i285.photobucket.com/albums/l...pspwoe9gqz.jpg

http://i285.photobucket.com/albums/l...ps9ig85mfc.jpg

Ceiling up. Lloyd solicited our neighbour Greg, who runs a woodworking business across the street. Greg has been a great help on many occasions,including Drywall. He has also come to our assistance many times with his forklift. For compensation he would only take contributions of a decent Red Wine. Greg refers to Lloyd and I as &quot;office workers&quot;.
http://i285.photobucket.com/albums/l...swqk1dj53.jpeg

Primed and first coat of paint.

http://i285.photobucket.com/albums/l...psiwbd8vee.jpg

Re: Canuck and Edgemont Villages new Shop
 

Back outside, with good weather forecast we opted to have the back lot paved. Remember all that overgrowth, it turned out to be Japanese Knotweed a very invasive and re occurring weed. Our New lot only looked like this for two weeks as the Knotweed grew back through the ashphalt. We will be getting some new paving done next spring.

Before the paving started we needed to remove the old Chimney. I wanted to use the big ass tow strap and truck. The chimney seemed wobley enough so we thought it would come down with a push!


[img]<a href="http://i285.photobucket.com/albums/ll49/paulolds/th_shopvid1_zpsiplpypf5.mp4" rel="nofollow" target="_blank">http://i285.photobucket.com/albums/ll49/paulolds/th_shopvid1_zpsiplpypf5.mp4[/img]</a>




Hole dug for new catch basin.

http://i285.photobucket.com/albums/l...pswp8nno7p.jpg

Basin arrived about 30 minutes before the paving started.

http://i285.photobucket.com/albums/l...psgpxvictg.jpg

With Gregs Forklift assistance, the basin was in in about 30 minutes.

http://i285.photobucket.com/albums/l...psh9d6zler.jpg

http://i285.photobucket.com/albums/l...ps7co5s7ut.jpg

http://i285.photobucket.com/albums/l...pstswnd4fp.jpg

http://i285.photobucket.com/albums/l...pspiefjc2h.jpg

Re: Canuck and Edgemont Villages new Shop
 

Great progress!!!

The neighbors will be very happy!!

I see you moved cars in already and a vintage gas pump:-)

I am so jealous of the &quot;space&quot; no need to move things to move things to move things so a &quot;space&quot; appears:-)

Ryan

Re: Canuck and Edgemont Villages new Shop
 

Looks great, guys!