1970 up 2nd gen finned aluminum SBC valve covers 3965543 / 3965544
 

Hi Gang, I believe these are the second generation ubiquitous SBC finned aluminum valve covers that I have available here.

3965543 LH
3965544 RH

Like the LT-1 350 Camaro Z/28 or Yenko Chevy Deuce or even the Corvette Vette came with.

They are used and have a driver patina, but could likely be polished up / restored easily. No evident issues or cracks. No baffles. Factory drippers present. Screw in oil cap. Straight (across) bolt holes of course, not staggered.

They present very well, as shown. Dusty as found, and recently removed. No oil cap.

350.00 PPG shipped & insured to the 48.

Thanks all,
Anthony

bump again

300.00 PPG plus now

thanks!

bump again

250.00 PPG plus now

cheers!

Hi again Friends, I received another PM on these and will post below verbatim:

"Hi Anthony, Just a quick FYI on the valve covers. These would be correct for '73/74 Z28 and 73-82 Vette.. Easy to spot the wide relief adjacent the inner bolt hole which provided clearance for the EGR valve in '73. '70 were almost identical except the relief was same short length on both sides and '71/72 used a push in rubber oil fill cap."

I'll acknowledge that my original ad's wording isn't technically incorrect, but to ensure there's no misleading at all; see above please. I'm learning every day! Thanks for watching out for us.

Accordingly, I'll sell for 120.00 PPG shipped now, since I'm sure they're less desirable being 1973 up.

You can get the look at a fraction of the price here.

Cheers friends, and thank you!
Anthony

bumping again in case anyone wants the look at a lesser price...