WIW, 69 Camaro power window set
 

So I have a factory 69 Camaro PW setup, take off from early 80s. Doors, qtrs, switches, wiring (some cuts), nice black deluxe door panels and some extra motors. Unknown if working, but stored well since then. Warren had a "wanted" ad up. Only have the door panels, not the qtrs interior panels, sorry. Probably sold them when I pulled them since I have convertibles.

I suck at valueing these types of parts, any help?

I know I need pics, but have to pull those heavy things out of boxes in the basement first :(

Thanks!

I had 2 sets of power windows that I sold a couple of years ago. I had every wire from the horn relay back. All the circuit breakers, relays, switches, harness, regulators, etc. all working. No décor panels. I got 500.00 per set. One on freebay, another outright sale....Joe

If the door panels are nice there is some good value there as well.

Are the rear regulators for a convertible? I dont know of the value, but would like to have power in my convertible.

Thanks Gregg

Thanks all, door panels are really nice, but I have to take a good look at them. Drivers has some edge wear rear top, I think pass side is better.

I have to get some pics up :)

Rear regulators are the same, coupe or vert. Only interior qtr panels are diff.

Sorry, picked up a bug on Friday and feeling poor and was not able to pull parts :(

Pulled the door panels 1st, will hunt down the rest later today.

Carpet needs to be replaced on both panels, drivers door has missing vinyl and crack upper rear edge. No other issues I can see, armrest looks good.

http://www.fototime.com/864BC6B93BF745A/standard.jpg
http://www.fototime.com/8A5934826C3DA80/standard.jpg
http://www.fototime.com/EAEA625978842C9/standard.jpg

Pass side has no cracks, but I see some ripples on armrest. bottom rear is bowed out a little.

http://www.fototime.com/C177D49E0597239/standard.jpg
http://www.fototime.com/DBAB96575C8AF6D/standard.jpg
http://www.fototime.com/D5D18D6EFF295C9/standard.jpg

Regulators:
http://www.fototime.com/0A920EB92AF45D0/standard.jpg
http://www.fototime.com/97638747EFDD2E1/standard.jpg

Switches:
http://www.fototime.com/1B94BE947E0A5B9/standard.jpg
http://www.fototime.com/79508275F5D5B78/standard.jpg

Extras:
http://www.fototime.com/F56227FB959F924/standard.jpg

Wiring, missing a bug chunk over the dash I assume, plus cuts at doors and qtrs :( worse then I thought:
http://www.fototime.com/E680FD4EE3F7C1C/standard.jpg
http://www.fototime.com/71D43144483C834/standard.jpg
http://www.fototime.com/926E8CFD3CC15F9/standard.jpg
http://www.fototime.com/0388255820F316A/standard.jpg

Would rear regulators be different in a convertible than a hard top. I know the shape of the glass is but thought regulators were the same.

I would say the power window set up is worth a thousand dollars with out the door panels

The rear regulators are the same coupe & vert. The glass on a vert only is different in the top contour. The rest of it is the same. thx