Re: Lakewood square traction bar measurements
What? Cannot draw [img]<<GRAEMLIN_URL>>/no.gif[/img] You just had a sketch painting class recently [img]<<GRAEMLIN_URL>>/naughty.gif[/img]
Very well done Dan |
Re: Lakewood square traction bar measurements
Nice job, answers many of my questions. Thanks. This post w/pics will certainly "gain some traction". [img]<<GRAEMLIN_URL>>/no.gif[/img] [img]<<GRAEMLIN_URL>>/scholar.gif[/img]... [img]<<GRAEMLIN_URL>>/beers.gif[/img]
|
Re: Lakewood square traction bar measurements
I have the measurements drawn. I did it for 67 to 69
Camaro bars. |
Re: Lakewood square traction bar measurements
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ds1</div><div class="ubbcode-body">I have the measurements drawn. I did it for 67 to 69
Camaro bars. </div></div> And??? Are you willing to share? Can you post that drawing, so that others may benefit? |
Re: Lakewood square traction bar measurements
PM your email. It is not a great drawing. I did it for my records. But I have no problem sharing. I should make a better drawing and rescan it.
|
Re: Lakewood square traction bar measurements
ChevyandPontiac, I could use an overall picture of a tape measure from the back to the front to locate the spring plate and front strap for the u-bolt I've got most other measurements I need. THANK YOU for taking these pics! I have drawn up some more detailed diagrams if anyone needs them - so PM me your email and I can get you what I have so far
I bought PXTX last set of J-bolt U strap for these bars and few months ago I cleaned out my attic and I found all my used J-bolt parts, so I'm making a set of the longer ones. My son is working at a metal shop and he can laser cut the shock plates, frt&rear u-bolt straps and shock mounts if anyone needs them I may be able to persuade him to run more on a limited basis. Only issue I have is we wont be able to bend the 5/16" ears that the shock mounts weld to like Lakewood did, so I may have the spring plates with out that and weld on the ears on afterwards I have a set of square tube short bars that are almost the same as these but spring plates are different In case someone wants to make a slightly newer version. https://www.yenko.net/ubbthreads/pics...od_bars_iv.jpg |
Re: Lakewood square traction bar measurements
Look at this on eBay http://www.ebay.com/itm/302233576969
|
Many thanks to the OP for the great photos!
Anyone with drawings still check in once in a while? Zman, I'm guessing your son works somewhere else now; any chance you have a spare pair of mounting plates on a shelf somewhere? |
All times are GMT. The time now is 11:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.