The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Pit Area - Racing (https://www.yenko.net/forum/forumdisplay.php?f=97)
-   -   Anyone install the Ramjet ZL-1 in a 69 Camaro? (https://www.yenko.net/forum/showthread.php?t=103036)

iluv69s 01-31-2009 03:21 PM

Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
Well......
I've finally had Jerry M. come down and certify my ZL-1 before I started any work on it. All these years I've owned it and I've recently just started thinking about doing something with it. Unfortunately, "these times" have made me re-think alot of things in my life!! Anyway, when I bought this car, I had always planned on taking it down the strip just the way Chevy intended...I was always worried because I did not want to hurt the original motor, so fortunately, Chevy did me a favor and came out with the ZL-1 Ramjet motors...I managed to purchased the serial numbered 34 Ramjet Motor to match my car. Although I am still up in the air with the car a bit, I am seriously thinking about finishing my car...and for now, installing the Ramjet Motor, and non-original 4-speed and 12 bolt rear ...Then I can take it to the strip and "WOMP ON IT" for a while.... just like Chebie wanted!!!..I will store the original motor for now until the car can be "officially retired" to trailer queen status https://www.yenko.net/ubbthreads/imag...thumbsdown.gif.......ayayay

Anyway...I was curious if anyone has installed a Ramjet ZL-1..or 502 for that matter..and any issues?? electronics? fuel system?...and does the plenum clear the cowl hood??? It would be cool to see a pic of how it looksssss!! I remember an article after the motors came out about the motor installed in a red 70? Chevelle vert?...anyone have that article?

https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif https://www.yenko.net/ubbthreads/imag...ins/3gears.gif

Thanks, Max

1967Z28 01-31-2009 08:36 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
Max,

There is a Ramjet Zl-1 in a customized '69 Camaro in the new Hot Rod magazine this month. They mentioned something about taking an inch of height out of the intake to clear the hood.

-Jon

CamarosRus 01-31-2009 10:42 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
Anybody have KNOWLEDGEABLE info about what engine assy or parts thereof are in the "#27 ZL-1" that was recently sold for $319,000 at Barrett-Jackson Scottsdale 2009 ???

iluv69s 02-01-2009 03:47 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
[ QUOTE ]
Max,

There is a Ramjet Zl-1 in a customized '69 Camaro in the new Hot Rod magazine this month. They mentioned something about taking an inch of height out of the intake to clear the hood.

-Jon

[/ QUOTE ]

Hey Jon,

That sounds like a bit of work to make the plenum fit...ayayay...I dont know if I want to go there??? Maybe a whole in the hood for now??? Or an aftermarket taller cowl hood....I'm gonna go out and buy that magazine today!!!

Thanks Alot, Max

iluv69s 02-01-2009 03:51 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
[ QUOTE ]
Anybody have KNOWLEDGEABLE info about what engine assy or parts thereof are in the "#27 ZL-1" that was recently sold for $319,000 at Barrett-Jackson Scottsdale 2009 ???

[/ QUOTE ]

Hey Chuck, the only "knowledgeable" info. I can give you is that the original motor from ZL-1 #34 and the Ramjet ZL-1 Motor #34 are NOT in the ZL-1 from BJ..
https://www.yenko.net/ubbthreads/imag...lins/dunno.gif https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Those two motors are here in my garage...

Charley Lillard 02-01-2009 05:19 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
I have never heard of any of the Ramjet ZL1's making good power.

iluv69s 02-01-2009 05:38 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
510 HP and 493 Torque....says Chevrolet.....not baddd...that's probably enough to spin the tires a bit!!
https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

...and I think the Ramjet motors really look cooll!!!! ..

...and mostly(is that a word?)..I don't have anything else cooler to put in it... https://www.yenko.net/ubbthreads/images/graemlins/no.gif https://www.yenko.net/ubbthreads/images/graemlins/no.gif...


But Charley, If you want to lend/donate me a motor more powerful, Id be glad to oblige!!!

https://www.yenko.net/ubbthreads/imag...ns/naughty.gif https://www.yenko.net/ubbthreads/imag...ns/naughty.gif

Then you can have first pass at the strip, ok!!

shor 02-01-2009 05:48 PM

Re: Anyone install the Ramjet ZL-1 in a 69 Camaro?
 
one of our members had a problem with a ramjet in his chevelle.


All times are GMT. The time now is 04:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.