Identifying Big Block Valve Covers
 

Does anybody know if there is a website that shows the applications of different BBC valve covers? I have a bunch of old chrome dripper valve covers and would like to ID them. Crane Corvettes used to have pictures of many of them but the pictures have been pulled. I plan to sell the covers and do not want to misrepresent them.


Thanks,

Jason https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Identifying Big Block Valve Covers
 

Many of Crane's valve cover auctions have a single picture that should get me started.


Thanks,


Jason

Re: Identifying Big Block Valve Covers
 

Here is what I am up against:

http://i179.photobucket.com/albums/w...001Small-1.jpg

Jason

Re: Identifying Big Block Valve Covers
 

(showoff)

Just kidding... I was going to suggest ebay?

-Dan

Re: Identifying Big Block Valve Covers
 

Jason, the third one from the bottom on the right side sure looks like a 69 Driver's side for Chevelles. It seems to have the correct slant at the back. Does that one have a little wire clip near the middle on the lower side facing what would be the driver's fender?

Re: Identifying Big Block Valve Covers
 

Top pair, left, might be 67-69 Camaro, 68-69 Nova. Any wire clips? and need an image of the end nearest the firewall of the one on top.

Top pair, right, second down looks like it might be 69 Camaro/Nova. It has the wire clip on the driver's side lower edge. Is that all the clips? Need a better image of the end nearest the firewall.

Martin

Re: Identifying Big Block Valve Covers
 

I will snap some pictures tomorrow while cleaning them. Dan, not showing off, I just don't like to be an ignorant seller. Also, if a member needs a pair I would like to give them first shot. I know you were just poking fun.


Jason https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: Identifying Big Block Valve Covers
 

Jason, These all purchases at either POMONA or LONGBEACH Swaps ?????

Not quite the Goldmine it once was, but evidently keeping you in EBAY merchandise????

Re: Identifying Big Block Valve Covers
 

No, these covers came out of a large buy out in Northern California. Unfortunately, I have not been to Pomona or Long Beach for quite sometime.


Jason

Re: Identifying Big Block Valve Covers
 

OK, I gave the covers a quick cleaning and took some pictures. I tried my best to pair the covers up properly. These covers were boxed all together so I was not sure which went with eachother. I was able to pair a few from gaskets, etc. I really just used my best judgement on the rest. Pictures coming.