Getting Ready for the Dover Reunion..
 

Got the 70 Black TH400 car out of its &quot;sleeping bag&quot; on Monday to get ready for the Dover Reunion and Nostalgia Drags. There were some puddles of tranny fluid in &quot;the bag&quot;..so I decided to have my boys at Kinderhook Transmission go thru everything and get her ready for the 1320 [img]<<GRAEMLIN_URL>>/burnout.gif[/img]

I ordered some Energay Suspension motor and tranny mounts...we are upgrading the lines to the remote cooler and fixing a few leaking seals and gaskets. Also added a nice yellow timing tape to the balancer...this will help my &quot;aging vision&quot; [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

Every time you look at one of these old cars you see something new...Jeff at the shop pointed out the aftermarket converter that was installed back in the day. (I never knew [img]<<GRAEMLIN_URL>>/hmmm.gif[/img]) This car was raced in the Buffalo, New York area and a prior owner must have added the high stall unit along witht he 4.10 gears and Lakewood Bars. I need to install some Lakewood stickers to the bars before Saturday...some older bearded gentlemen gave me a set [img]<<GRAEMLIN_URL>>/worship.gif[/img]

This shop does first rate work..they are old school and very thorough and clean. They truly respect your car and enjoy working on the classic hotrods...glad they are right up the street [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

We leave early Saturday morning to go to Lebanon Valley..Dino and company will be in attendence..hope it doesn't rain!

wilma

http://i1235.photobucket.com/albums/...0/IMG_3657.jpg

http://i1235.photobucket.com/albums/...0/IMG_3643.jpg

http://i1235.photobucket.com/albums/...0/IMG_3644.jpg

http://i1235.photobucket.com/albums/...0/IMG_3646.jpg

http://i1235.photobucket.com/albums/...0/IMG_3648.jpg

http://i1235.photobucket.com/albums/...0/IMG_3645.jpg

http://i1235.photobucket.com/albums/...0/IMG_3651.jpg

http://i1235.photobucket.com/albums/...0/IMG_3652.jpg

http://i1235.photobucket.com/albums/...0/IMG_3655.jpg

http://i1235.photobucket.com/albums/...0/IMG_3654.jpg

Re: Getting Ready for the Dover Reunion..
 

Tom, where was this car sold new?? My Nova was sold new at Gillogly Chevrolet in West Seneca and was also street raced in the Buffalo New York area back in the day...

Rich

Re: Getting Ready for the Dover Reunion..
 

Nice! Have fun Tom!!

Re: Getting Ready for the Dover Reunion..
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mr. Chevy</div><div class="ubbcode-body">Tom, where was this car sold new?? My Nova was sold new at Gillogly Chevrolet in West Seneca and was also street raced in the Buffalo New York area back in the day...

Rich </div></div>

Rich...I don't know where it was sold new...the guy I got it from said it was in storage for many years following the death of the original owner.(car has only 33k miles!) this guy bought it to flip and I caught the flip [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

There is a sticker in the trunk from Wellers Speed Shop...this guy actually posted once here on the site, then the trail went cold.

I would like to know more about the car...just haven't spent the time on the detective work...

By the way..it runs strong...amazing car to drive with that TH400..when it shifts..you know it!

wilma

Re: Getting Ready for the Dover Reunion..
 

Tom, was the gas tank changed - or is it a late '70 build?

Re: Getting Ready for the Dover Reunion..
 

M...when I bought the car it still had the original tank, but it was full of corrosion and junk from sitting for many years. The guy tried flushing it out, but it was never right. So, I installed a new tank, flushed out the fuel line and that did the trick. I kept the factory tank, it is in nice shape on the outside...probably could be restored and used at some point.

****there is a neat story about the gas tank.
When I went to see the car the owner told me of the fuel tank issues but said he had come up with a &quot;temporary fix&quot;...he had a 5 gallon can of race gas on the passenger side floor with a rubber hose out the vent window to the fuel pump [img]<<GRAEMLIN_URL>>/shocked.gif[/img]

So my first ride in the car out in Buffalo was with this guy sitting in the passenger seat holding the gas can, while I drove the car. I floored it on a side street in his neighborhood and the next thing I knew I was looking at the trunk lid as the car almost swapped ends...It was an animal!...that test drive sealed the deal.

[img]<<GRAEMLIN_URL>>/3gears.gif[/img]

Re: Getting Ready for the Dover Reunion..
 

good maintenance is the key Tommy. You are on the right path. Lets hope you will &quot;floor it&quot; this time around and go straight. I'll give ya $450.00 for the traction bars that are on that car!

Re: Getting Ready for the Dover Reunion..
 

Sammy...I ran the car last year at the Dover Reunion...but, with only street radials it was tough to get out of the hole. I will avoid the water this year...and try to feather it a little and see how we do. The car has all new brakes, shocks, control arm bushings, lower ball joints, sway bar links, etc...the tranny cooler lines and the old motor/tranny mouunts concerned me, so that is why they are being replaced/repaired. I will put in a fresh set of plugs..check the &quot;Eric prepared&quot; 850 Holley, adjust dwell/timing as needed and top of the tank with some 100 octane go juice. Hopefully it won't rain...

wilma

ps..Traction Action bars are not for sale [img]<<GRAEMLIN_URL>>/3gears.gif[/img]



last year at the reunion...

http://i1235.photobucket.com/albums/...0/IMG_2546.jpg

Re: Getting Ready for the Dover Reunion..
 

we will wait for the updates! Hey, is there a motor in that car or is there a jack under it? Thats it, you must be uncorking the headers.

Re: Getting Ready for the Dover Reunion..
 

Yes...there are 402 cubic inches of Chevy power [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Not sure about the open headers...perhaps..lot of work for a few runs down the 1320.

wilma