Aluminum intake cleaning/refinishing
 

What are the best options for cleaning and refinishing an aluminum intake back to "like new" condition?

Re: Aluminum intake cleaning/refinishing
 

Lacquer thinner is the best thing I've used. If the intake is off the engine, fill spray gun with the thinner, turn up the air, and spray it down hard. If it's on the engine, I put lacquer thinner on a rag and wipe it down.

Re: Aluminum intake cleaning/refinishing
 

Many guys like oven cleaner for heavy cleaning and mag wheel cleaner for lighter cleaning. I use plastic media in a blast cabinet for original intakes that I don't want to mess up.

If I have a heavily stained intake I use plastic, followed by garnet, followed by glass shards, and finally glass beads.

I plan to do a tutorial with different techniques for this site soon.


Jason

Re: Aluminum intake cleaning/refinishing
 

Thanks guys.

Re: Aluminum intake cleaning/refinishing
 

I find that glass beaded aluminum leaves a bright-shiny etched look. Personally, I prefer the look of a tumbled intake with a clean but dull-smooth finish.

Re: Aluminum intake cleaning/refinishing
 

I had mine put in a wheelabrator.https://www.yenko.net/ubbthreads/pics...y_intake_2.jpg

Re: Aluminum intake cleaning/refinishing
 

Re: Aluminum intake cleaning/refinishing
 

That's the way to go if you have access to the machine.

Re: Aluminum intake cleaning/refinishing
 

Try Brake Cleaner

Re: Aluminum intake cleaning/refinishing
 

I glass bead blasted my 163 intake with very, very fine glass powder in my blast cabinet, but I must have had the air turned up too high as I caused some pitting in the aluminum. Any easy way to fill that? Or other suggestions?