The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   L78/L89 specific Forum (https://www.yenko.net/forum/forumdisplay.php?f=134)
-   -   69 Nova L78 Broadcast Sheet (https://www.yenko.net/forum/showthread.php?t=134939)

lbnaz 11-16-2015 08:52 PM

69 Nova L78 Broadcast Sheet
 
4 Attachment(s)
Found this inside the rear seat of a Nova along with the paper cup hooked in a hog ring. All we knew was it was a 396 4 speed car. Still has the original 12 bolt and M20 in it with the vin. The motor is long gone. Any idea of the value for it as a runner. Has a 66 396 961 casting in it now. Looks like drivers quarter was replaced but all else is original paint. There is zero rust in trunk or floors just a little in rear window. Larry. 520-349-2337

cook_dw 11-17-2015 03:03 AM

Re: 69 Nova L78 Broadcast Sheet
 
The cup is very cool...

lbnaz 11-17-2015 08:49 PM

Re: 69 Nova L78 Broadcast Sheet
 
2 Attachment(s)
A couple people have asked for photos of the car. Here are some. Thanks.

mockingbird812 11-17-2015 09:56 PM

Re: 69 Nova L78 Broadcast Sheet
 
nice - reminds me of Gradys burgundy beauty that Mikey did so beautifully. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

lbnaz 11-18-2015 09:02 PM

Re: 69 Nova L78 Broadcast Sheet
 
1 Attachment(s)
Here is a photo from on top of the gas tank. Pulled it to clean it out. Has 396 in crayon on it. Never seen that before. Larry

lowmile 11-18-2015 10:09 PM

Re: 69 Nova L78 Broadcast Sheet
 
It was probably marked because of the sending unit difference.

WILMASBOYL78 11-19-2015 12:43 PM

Re: 69 Nova L78 Broadcast Sheet
 
Cool car...nice find on the Fisher Body sheet and the GM paper cup!

**fyi: the M20 listed on the build sheet does not always mean the trans is an M20...it was simply a code to tell the Fisher Body guys to cut a hole for the floor shift. The trans should have a date stamp and a letter code following the stamp [A=M20, B=M21, C=M22]. 1969 was the only year the L78 code was listed on the build sheet...

I see the interior trim is 731...is the rubber floor covering still intact?

wilma


All times are GMT. The time now is 05:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.