m/t spinner need 1
 

Iam looking for one of these spinners if anyone has one they will part with thanks.

Re: m/t spinner need 1
 

Do you just need the read medallion or a whole spinner?

Verne

Re: m/t spinner need 1
 

I need the whole spinner (lost one) ..thanks

Re: m/t spinner need 1
 

Sorry Scott. I can't help you with a whole spinner.

Verne [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

m/t spinner need 1
 

-

Have you seen the Radir repop spinners as below pic and link?
Different centres but maybe you can mod something to fit?
Sorry for your loss and best of luck replacing it!
[img]<<GRAEMLIN_URL>>/beers.gif[/img]
~ Pete

-

Radir Wheels...
http://www.radirwheels.com/accessories.htm

https://www.yenko.net/ubbthreads/pics...3675-image.jpg

-

Re: m/t spinner need 1
 

Before you buy the Radirs, I'd check to be sure their repros (copies) of originals will be a proper fit on original MT center cones. I've seen OLD original Radars on MT cones that were a little &quot;fat&quot; and didn't line up that well.
My advice would be to go either all Radir or ALL original MT.

Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: m/t spinner need 1
 

Scott, I found this late last night, Blurry Eyed, I did not see it was 3 years old, I guess I have spent more then 3 years looking for some stuff, so maybe it is still an active thread, it took me almost 12 hours to get registered so I could respond, so here U go, I had a question too.

I have these 4 Spinners (large photo) I bought on FB This year, They all appear to point the same direction, the same as the one you pictured above, I wanted to ask you, do you have 2 lefts and 2 Rights or is this the way they all point? Now look at the other photo (small), it appears the Raders WERE left and right, I remain confused if the M\T ones were or not?

Anyway, if U found some and have a Surplus of the 2 I need to make my set a little more correct, of if U have totally given up and have a broken set you can sell to the same end, or even can confirm one way or the other, I would very much like to know.
https://www.yenko.net/ubbthreads/pics...83-mtrader.jpg


https://www.yenko.net/ubbthreads/pics...0-dscn7571.jpg

m/t spinner need 1
 

'
Welcome aboard Ross!
[img]<<GRAEMLIN_URL>>/beers.gif[/img]
~ Pete

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PontiacRoss</div><div class="ubbcode-body">Scott, I found this late last night, Blurry Eyed, I did not see it was 3 years old, I guess I have spent more then 3 years looking for some stuff, so maybe it is still an active thread, it took me almost 12 hours to get registered so I could respond, so here U go, I had a question too.

I have these 4 Spinners (large photo) I bought on FB This year, They all appear to point the same direction, the same as the one you pictured above, I wanted to ask you, do you have 2 lefts and 2 Rights or is this the way they all point? Now look at the other photo (small), it appears the Raders WERE left and right, I remain confused if the M\T ones were or not?

Anyway, if U found some and have a Surplus of the 2 I need to make my set a little more correct, of if U have totally given up and have a broken set you can sell to the same end, or even can confirm one way or the other, I would very much like to know.
</div></div>

https://www.yenko.net/ubbthreads/pics...83-mtrader.jpg

https://www.yenko.net/ubbthreads/pics...0-dscn7571.jpg

Re: m/t spinner need 1
 

The M/Ts all curve in the same direction - no left or right.

Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: m/t spinner need 1
 

nope iam still looking for 1 if u have a spare..thanks