BB 67-9 Camaro Headers old ones
 

Picked up a set of Super Stock old school pipes. 2 1/8 slide in collector. Can someone lend a hand IDing these? I cannot remember every header manufacturer, but I have looked up the following-Hooker, Doug's, Hedman Hedders, Jardine, Stahl. Is there some other brand I am forgetting? Oops, Doug Thorley is another. Does someone recognize these by style or manufacturer? Thanks, sYc. https://www.yenko.net/ubbthreads/pics...5-img_3334.jpg
https://www.yenko.net/ubbthreads/pics...6-img_3333.jpg
https://www.yenko.net/ubbthreads/pics...7-img_3335.jpg
https://www.yenko.net/ubbthreads/pics...8-img_3336.jpg

Re: BB 67-9 Camaro Headers old ones
 

Look for codes stamped into the engine flange and let us know.

Re: BB 67-9 Camaro Headers old ones
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scuncio</div><div class="ubbcode-body">Look for codes stamped into the engine flange and let us know. </div></div>

I have looked and looked and looked again at the flanges and collectors and do not see any markings or numbers, so? But thanks Tony for your help.

Re: BB 67-9 Camaro Headers old ones
 

Maybe custom?

Re: BB 67-9 Camaro Headers old ones
 

I was going to say the flanges looked a little like Kustom headers...but those would have had the model stamped into the outer surface of the flanges.

Re: BB 67-9 Camaro Headers old ones
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scuncio</div><div class="ubbcode-body">I was going to say the flanges looked a little like Kustom headers...but those would have had the model stamped into the outer surface of the flanges. </div></div>
I actually meant custom, not Kustom. I thought maybe they were welded up by someone and not a manufacturer.

Re: BB 67-9 Camaro Headers old ones
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HawkX66</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: scuncio</div><div class="ubbcode-body">I was going to say the flanges looked a little like Kustom headers...but those would have had the model stamped into the outer surface of the flanges. </div></div>
I actually meant custom, not Kustom. I thought maybe they were welded up by someone and not a manufacturer.</div></div>

Have to agree -- with all the weld joints it appears someone had alot of time on their hands ... still look good. TAZ

Re: BB 67-9 Camaro Headers old ones
 

With the short down throws on drivers side and the rewelds, modifications.... I'd say a welded up set as well.....the flanges were readily available then and are still today..... #'s are usually stamped during or after assembly....

The welds too.....aren't anything you'd see on a Header Shops build.....definable stick welding at home.