FLOCKING FELT
 

ON A 69 CAMARO WAS THE GLOVE BOX LINNER & CONSOL INNER COMPARTMENT AND THE INSIDE OF THE CONSOL LID DONE IN FELT THANKS

Re: FLOCKING FELT
 

Re: FLOCKING FELT
 

I did my own about 20 years ago with a kit from a company here in Il. called DONJER
Came out great.


Oops,I see that is referenced..Great stuff!

Re: FLOCKING FELT
 

i did this using the TC link above...about 5 years ago. It worked well.

Re: FLOCKING FELT
 

I DID SEE DIFFERANT KIT TO DO THIS JUST NEEDING TO KNOW WHAT DOES OR DOES NOT GET THE FELT FOLCKING ? THANKS FOR ALL THE REPLYS

Re: FLOCKING FELT
 

I suggest a Double Dose of Flocking.
1st on the interior of the console base and a 2nd on the back side or interior of the lid.
I used the same kit (I chose to mask Hinge area, might not be how the factory did it but it is not seen)
https://www.yenko.net/ubbthreads/pics...9-flocking.jpg
https://www.yenko.net/ubbthreads/pics...flocking_2.jpg
https://www.yenko.net/ubbthreads/pics...flocking_3.jpg
https://www.yenko.net/ubbthreads/pics...flocking_4.jpg
https://www.yenko.net/ubbthreads/pics...locking_45.jpg
https://www.yenko.net/ubbthreads/pics...locking_46.jpg
https://www.yenko.net/ubbthreads/pics...locking_47.jpg
https://www.yenko.net/ubbthreads/pics...flocking_5.jpg
I think 67-68 glove boxes also received similar treatments.

Note * No skill required (See instructions)-
JIM