Help...deuce master/ booster disassembly
 

hi

need help guys

cleaning/ restoring my 1970 deuce brake booster set up

-removed the brake vacuum booster...no issues
-removed the master brake cylinder.....no issues
-removed the small top support bracket (one with the 1 mounting hole in it)....no issues

-but the large long mounting bracket (one with the 2 mounting holes in it) shown in the first picture.........i just can not figure out how that piece is removed/ separated from the brake line assemble

anyone done this.........if so what gives

some help would be GREATLY appreciated guys....pics if you have them as to how this get disassembled

thanks so very much
regards
chris

Haven't messed with any of that model but there's a good chance that it has some tabs on it somewhere that were "pinched" onto a corresponding raised spot on the "valve body".

Get an inspection mirror and see if it's attached to the underside of the block/body...can't see the whole piece in your pics.

EDIT AND ADD: Looking at your first pic....does that bracket run all the way up to the area where the steel brake line/fitting is attached to the "valve body"???

Don't know how to post pictures but if you send a phone number or email address I will get you some pictures of parts removed from 70 Z28.
Mike

Chris, Does your car have big block frame stands? Looks like it in the pics.

Scott