The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   1967 Camaro Upper Door Hinge Rebuild (https://www.yenko.net/forum/showthread.php?t=179645)

Andy 08-20-2024 07:55 PM

1967 Camaro Upper Door Hinge Rebuild
 
Well, after 26 years of ownership my upper door hinge has begun to sag on the drivers side. I'd prefer to rebuild the original hinge if possible rather than replacing it with an aftermarket part. Those of you that have done this, have you been able to find GM pins or are there aftermarket ones that actually fit? I ran across this GM part number (20046147) in my search last night and per what I've read, it should work, but I may have to cut some length off of the pins to make them the correct length, which is no big deal. I haven't dug up a part number yet for the bushings, so if any of you have one, it would be much appreciated. Thanks.

Rsconv68 08-21-2024 02:36 AM

5 Attachment(s)
I couldn’t find a kit, but you might be able to find what you need here. Circa 1974 parts book.

Too Many Projects 08-21-2024 03:41 AM

Heartbeat City has a very complete kit to rebuild them , IF all the parts are in stock. I've rebuilt a number of them with that kit, including '66 Chevelle, which still used the cast hinges.
https://www.heartbeatcitycamaro.com/...build-Kit-USA/

Andy 08-21-2024 01:08 PM

Thanks for the information!


All times are GMT. The time now is 03:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.