The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Parts/Memorabilia - Wanted (https://www.yenko.net/forum/forumdisplay.php?f=84)
-   -   Stering column/ignition switch parts (https://www.yenko.net/forum/showthread.php?t=81055)

Belair62 04-23-2005 06:32 AM

Stering column/ignition switch parts
 
I need an ignition switch mylon sector...and a ignition switch rack and rack spring....#31,38 and 39 in the exploded tilt column view in the 70 shop manual...the sector and rack activate the ignition on the car...mine are a bit worn and tend to hang up sometimes......anyone know where to get these parts ? Does Chevrolet still carry them ? I need them quick.

scuncio 04-23-2005 09:17 PM

Re: Stering column/ignition switch parts
 
Bob, Year One used to have the sector gear, at least...P/N 9116N. Not sure about the spring. Hope this helps, Tony

Belair62 04-23-2005 11:43 PM

Re: Stering column/ignition switch parts
 
Thanks Tony..I'll take a look.

Keith Tedford 04-24-2005 02:26 AM

Re: Stering column/ignition switch parts
 
Bob
Check with your GM dealer. I bought a few column bits and pieces in the past year for our '69 el Camino.

bwag 04-25-2005 08:18 PM

Re: Stering column/ignition switch parts
 
I noticed some of these parts in a steering column repair package in the HELP section at the local Autozone. Part # 83211,the rack and sector gear were included.

bad1racing 05-06-2005 11:03 PM

Re: Stering column/ignition switch parts
 
BOB,IF YOU HAVENT FOUND THESE YET HERE IS SOME INFO ON THESE.#31 SECTOR,GM #7805158 STILL GOOD NUMBER.#38 SPRING,GM #7804908 ALSO A GOOD NUMBER.#39 RACK,GM #7819853 ACTUATOR W/RACK WAS DISCONTINUED 04/87.HOPE THIS HELPS.TIHS IS MY FIRST POST SO I HOPE I DID IT CORRECTLY.BEST SITE ON THE WEB HANDS DOWN!!

Belair62 05-07-2005 02:31 AM

Re: Stering column/ignition switch parts
 
Thanks for the info...I finally got the column back together and it works perfect.....those little parts can cause a helluva headache ! Welcome to the site !

Pantera 05-07-2005 11:04 PM

Re: Stering column/ignition switch parts
 
hey a Nova guy....! Welcome to a bunch of great guys and your post is just fine. (Just remember that all CAPS is considered shouting at someone, on the internet) But don't worry about it we all had to learn that one too, So keep them coming.

You can be sure that somebody that is a GM parts guy is always, 'VERY' welcome here. for sure...!

Pantera https://www.yenko.net/ubbthreads/imag...s/headbang.gif


All times are GMT. The time now is 06:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.