'68 Firebird: Conversion to Delco HEI
 

Hi. I am converting to later model Delco HEI distributor in my '68 Firebird. Any place I can obtain proper how to instuctions? I do not want to use a kill switch unless I really have to. Thanks,
John

Re: '68 Firebird: Conversion to Delco HEI
 

is it going to fit the firewall, i know on camaros there is always a clearance issue. what engine are you running.

Re: '68 Firebird: Conversion to Delco HEI
 

I run HEI in my '70 350 Camaro and the GM unit fits perfectly on the back of the engine.
I cannot see any real issues fitting distributor back there... I got to have a least an inch or two remaining

Re: '68 Firebird: Conversion to Delco HEI
 

on a 1st gen camaro with a small block it generally takes a hammer to make an hei fit and allow for adjustment, motor mounts can be swapped to make it work a little better.
what engine is in the firebird?