|
L78 Holley Rebuild...
1 Attachment(s)
The black survivor is back from the Mini-Nats and I decided to send the 4557 to the doctor (Mr. Vintage) https://www.yenko.net/ubbthreads/imag...mlins/cool.gif for a rebuild. I have never touched the carb in 8 years...it is the original dated unit. Still has the original fuel block, lines and bracket. The original owner installed some kind of "old school" bracket to help kick in the secondaries (I guess)...you can see the bracket and pin in the photos. With a little help from Mr. Jackson, it will be good to go for spring driving.....check out the photos.
wilma underhood before removal.. https://www.yenko.net/attachments/327995-tn_DSCN1048.JPG |
Re: L78 Holley Rebuild...
1 Attachment(s)
...I finished the smog plumbing from the prior thread.
https://www.yenko.net/attachments/327998-tn_DSCN1049.JPG |
Re: L78 Holley Rebuild...
1 Attachment(s)
|
Re: L78 Holley Rebuild...
1 Attachment(s)
|
Re: L78 Holley Rebuild...
1 Attachment(s)
|
Re: L78 Holley Rebuild...
1 Attachment(s)
..original choke setup...you can also see the fuel line bracket..it has a part number stamped on it...there is also a small design stamp in the brass fuel block..
https://www.yenko.net/attachments/328003-tn_DSCN1053.JPG |
Re: L78 Holley Rebuild...
1 Attachment(s)
|
Re: L78 Holley Rebuild...
1 Attachment(s)
|
Re: L78 Holley Rebuild...
1 Attachment(s)
|
Re: L78 Holley Rebuild...
So that's it...pack it up tomorrow and send to Ohio.
wilma https://www.yenko.net/ubbthreads/imag...ins/3gears.gif |
| All times are GMT. The time now is 03:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.