Re: 1970 Chevelle SS 454 LS6 Rebuild + Details
I did the cam and lifters in a 11.0 to 1 CR 427 in my '69 last winter.
At the recommendation of my performance shop, I went with a set of Comp Cams solid lifters with the oiling hole in the bottom. I think these are the EDM lifters everyone is referring to.
I do not remember the exact number of the Comp Cams cam, but I thinkit is the Extreme Energy series 274S.
I can check if anyone is interested.
I could not be happier with this setup.
I run Sunoco Ultra 94 without any issues.
With a M22 and 4.11's in the rear, the car will spin the tires in any gear and pulls until I run out of nerve and have to back out of the throttle.
I use the stock 499 distributor with a set of Accel performance points and a Blaster Coil.
I have not had any issues running points and the stock distributor since I bought the car in '96.
__________________
Thomas Schilf
'69 Camaro SS, L78, M22, 4.10 Posi
'69 Camaro E/SA
'00 Camaro SS Convertible
'04 Harley FXST
'80 Chevy Blazer (My first new vehicle)
|