[Bill Rose]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: L78racer</div><div class="ubbcode-body">maybe you know this but you are missing the u-bolt at the rear of the shifter bracket on the tail housing. </div></div>

It's not missing Paul, it was eliminated. The tail housing on the Autogear M22's is a larger diameter than a stock Muncie, so the u-bolt doesn't work/ too small. The mounting plate has been drilled for the Autogear trans. So it has regular 3/8&quot; bolts holding the mounting plate, much like a Chevelle set-up. The round part of the plate had to be re-ground to fit up against the larger diameter housing too........good eye though!! I got good advise from Ed Hartnett in Phily/the Muncie guru.

Yes Dan, we'll see you Thurs......looking forward to this one......big time!!