View Single Post
  #1  
Old 12-17-2015, 11:24 PM
kwhizz kwhizz is online now
Yenko Contributing Member
 
Join Date: May 2004
Location: LS Make'um Better Guy
Posts: 7,746
Thanks: 855
Thanked 668 Times in 201 Posts
Default Re: 57 Nomad Project.........

Things are moving from the waiting for "Stuff" mode to the Get'r Done mode.......... Thanks to Donny Bock at American Autowire I now have the right stuff to upgrade the Nomad......


We are going to replace the "Old" with the "New"











Then........It's kind of hard to see how far out the frame mounts are......I made the Aluminum Jig to the 16.5" centerline as required and the mounts are way out.......I cut them out and will modify them correctly......








Also.....after test fitting the engine in the car.......It became apparent that my plan to mount the A/C compressor down low like I did in the Chevelle just wasn't going to work.......Darn......Mounting the compressor up high on a LSA engine is not that simple.........so.........I decided to bite the Bullet and buy a Concept 1 front drive system.........and with this system I had to remove the front snout assy from the engine so I can send it to Lingenfelter to get a new Hub installed on the Supercharger shaft for the Concept 1 Pulley......











Here we go............
__________________


The Best things in life......Aren't Things
Reply With Quote