Re: New Yenko Owner needing some help!
Obsession can be a terrible thing at times.
If there is a number somewhere on that switch you may be able cross-reference it. You can also disconnect the plug and using the diagram jump wires to see if you get at least turn signal lights in the cluster. That would indicate the rest of the harness is good in the dash. For the lights, 12V comes from the hazard and turn signal flashers. If you cannot discern the color code, let me know and I will see if I can figure it out.
Also, while you’re under the dash, there is a small spade terminal on the side of the cluster next to and slightly below the gas gauge – that is the ground wire to the harness … make sure it is connected securely.
Have A SAFE INDEPENDENCE DAY and listen to your wife-mate ... that Deuce will be there tomorrow!!! TAZ
[img]<<GRAEMLIN_URL>>/flag.gif[/img]
__________________
You've never lived until you've almost died -- for those who fight for it, life has a flavor the protected will never know!
|