More floorpan work done this weekend. Added a couple of shots showing an area (rear trunk pan) representing what the underside looked like before I touched it, then after a heat gun/plastic scraper, then wiping with mineral spirits. Once I get most of the underside through these steps, I'll go back through it all with some "KrudKutter" degreaser which will clean it up a little further. Couple things I noticed was that the reinforcement plates on the trunk pan (rear seat area) was mostly black primer under the crud whereas the insides of the rear frame rails were mostly that bluish/grey primer. The horizontal surface of the trunk pan is more whitish primer with some body color overspray on the ribs that face toward the outside of the car. Also included a shot of the outside edge of the trunk pan that hangs below the rear frame rail - it really got a strong shot of body color overspray. I'm anxious to get back out there and see why the outside of the rear frame rail looks like!
__________________
SOLD 1969 427 COPO Camaro Lemans Blue/Black, M22 4 speed, 15,800 original miles
|