Been a hectic week business-wise, but still finding some time to get out to the shop and work on the brake system here and there. All of the parts have cleaned up nicely and are now going back together. This includes all the hard lines, clips, bolts, check valve, distribution block, proportioning valve, and the master cylinder. Here's another group of pictures to share as the car starts going back together with parts starting to go back on from the rear forward. It's really great putting parts back on when they actually fit as they should. It's also been great knowing that many of these parts came off rather easily as well since this car was not rusty, to begin with.
Original paint mark on the proportioning valve.
Cleaning up all of the parts on the bench. Not replating anything here.
The lid is cleaned on the master, but not being restored or replated.
#3952757 Line Bracket. I never knew there were numbers on this part.
Started installing the hard lines working from the rear diff forward.
Check Valve cleaned up nicely. I had to replace the flare nut on the right side.
The original clips and bolts cleaned up nicely. Again, not replating anything.
A little patina left behind after cleaning the floors and lines back here. Love it!
The master back in place with the front lines coming soon.