Photo 369 - Original voltage regulator before clean up. I used lacquer cleaner to remove overspray and then polished original finish back to a shine or to the best it could be.
Photo 370 - 372 - Finished product
I next went through the windshield and back glass trim.
Photo 373 - 374- Before starting the polishing process.
Photo 375 - Mid progress of lower windshield trim. I use an 8" (2 actually butted together) stitched cotton polishing wheels on a pedestal mounted bench grinder along with green polishing compound.
Photo 376 - 377 - 1st step of the polishing is now complete.
Photo 378 - All trim now done with step one of polishing. Next will be evaluating any shadowing, dings and remaining scratches and moving to a final polishing compound on the buffing wheel and I will finalize it with some hand applied of Wenol paste polish.
Last edited by cook_dw; 12-20-2022 at 12:13 PM.
|