69 L78 4 Spd Chevelle intake fitting for brakes

[Zman1969]

I found HBC has fittings, but does this have any extra vacuum ports or just one for the brake booster?

[daveg]

"OLE BLUE".
Feb 69 Baltimore L78 M22.

[daveg]

Looks short

[olredalert]

Originally Posted by Zman1969

I found HBC has fittings, but does this have any extra vacuum ports or just one for the brake booster?

----I just dug two out of my pile. The 1st has a small port directly out of the other side. The 2nd has a small port at about 2 oclock from the big port going to the booster. If this helps you can either one for the shipping....Bill S

[WILMASBOYL78]

Wouldn't the automatic cars have a fitting with 2 connections...one that goes to the modulator and one for the booster??

-wilma

[daveg]

His car is a 4spd like ours. 1 fitting

[Hawkeye]

Just providing an additional photo to backup Dave’s response. Single port for 4 speed cars.

Let us know if you need any other details.

Thanks,
Marty

[Zman1969]

OK now that thats figured out I need the tube and bracket if anyone has a spare

[MarcDant]

Originally Posted by Zman1969

OK now that thats figured out I need the tube and bracket if anyone has a spare

is this the unit you are looking for ?

[Zman1969]

Originally Posted by Rsconv68

There’s a few variables for this fitting. AC, Auto transmission will add a port or 2.

its a 4 Speed non air car

Originally Posted by MarcDant

is this the unit you are looking for ?

pretty much does it have bracket to base of carb?