Quote:
Originally Posted by dustinm
No need to replace old housings. Wet sand lens with 600 until all the yellow water disappears then clearcoat with your favorite clear, I like SPI for this.
As for lights I prefer to use bulbs in 5000k or 5500k LED color temp, for white light at night without too much blue or yellow
|
Not if the housings are Spyder cracked on the inside, there is no way to fix that as I heave found. And my experience with wet sanding them or using tooth paste is the yellowing always comes back. Bill
01-23-2024, 08:46 PM
Threaded Mode