Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

I feel a little better about these parts. (I am learning what works with what)

Plan:

Lakewood 15100 bell housing, and fork, and front shield in Texas I will buy, but we have been trying to work out shipping:-( terrible! I will find a less expensive way to get these parts by hook or by crook.

Maryland flywheel and slip yoke are good to go, as I have been convinced there were be threaded holes for the 10.5 inch clutch or the 11.0 inch clutch:-) I hope to pick these up from somebody (Albert Galdi?) driving from that part of the world to MCACN (I should ask first:-)

Moving ahead and also I am happy to be making the car safer.

Ryan

[John Brown]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">I will find a less expensive way to get these parts by hook or by crook.
</div></div>

Fastenal (the nut and bolt company) I understand is really cheap, but that's only an internet rumor. You'll have to check that out for yourself.

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: John Brown</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">I will find a less expensive way to get these parts by hook or by crook.
</div></div>

Fastenal (the nut and bolt company) I understand is really cheap, but that's only an internet rumor. You'll have to check that out for yourself. </div></div>

Thanks!!

I will check, we use Fastenal at work so may be able to ship all the way to me for reasonable cost?

Ryan