Product Question; Rust Treatment

[BCreekDave]

Originally Posted by earntaz

I have used BoeShield and it is all it is advertised ... great stuff ... TAZ

Good stuff, but my can seems to forever clog internally! I have to pop the nozzle cap off and blow compressed air down the little plastic tube. then it will work for awhile and clog again. Any secrets here? It does seem to do it less in hot weather and I have dropped the can in a bucket of hot water in the winter and that helps too.

[Crush]

Originally Posted by BCreekDave

Good stuff, but my can seems to forever clog internally! I have to pop the nozzle cap off and blow compressed air down the little plastic tube. then it will work for awhile and clog again. Any secrets here? It does seem to do it less in hot weather and I have dropped the can in a bucket of hot water in the winter and that helps too.

Had same problem w 2 cans moved to fluid film and wool wax

[m22mike]

Originally Posted by BCreekDave

Good stuff, but my can seems to forever clog internally! I have to pop the nozzle cap off and blow compressed air down the little plastic tube. then it will work for awhile and clog again. Any secrets here? It does seem to do it less in hot weather and I have dropped the can in a bucket of hot water in the winter and that helps too.

Did the same with compressed air to get it working. As I often do with rattle can paint, try soaking the can it hot water for a few minutes. And clear the nozzle after use.
On the can's I could not clear. I poked a hole in the top with a awl and drained it into a squeeze bottle. Apply with a China brush.

Mike

[earntaz]

Originally Posted by BCreekDave

Good stuff, but my can seems to forever clog internally! I have to pop the nozzle cap off and blow compressed air down the little plastic tube. then it will work for awhile and clog again. Any secrets here? It does seem to do it less in hot weather and I have dropped the can in a bucket of hot water in the winter and that helps too.

One of mine did the same thing ... went to Wally World and bought a cheap squirt mister, drained the propellant form the BoeShield and punched a hole in the can. Dumped contents into the mister -- work good... goes long way.