62 - 409 starter question - Page 2

**McCune** · #11 07-18-2023, 12:55 AM

I think the nut and bolt is correct!

**John Brown** · #12 07-18-2023, 03:00 AM

The pin and snap ring show up in this picture.

**McCune** · #13 07-18-2023, 03:32 AM

That pin is for the aluminum housing starters. Cast iron got the special bolt!

**Bill Pritchard** · #14 07-18-2023, 12:29 PM

The knowledge base on this site continues to amaze me....

**RPOLS3** · #15 07-18-2023, 12:53 PM

Quote:

Originally Posted by Bill Pritchard

The knowledge base on this site continues to amaze me....

Indeed - that's why I posted the question here. Not a single response yet on the other site - which surprises me a bit, but still a very good site too.

So it sounds like I just need the correct hardware for the horizontal bolts. I reached out to Rich (Enoch) to see if he has them.

Thanks all!

**John Brown** · #16 07-18-2023, 05:12 PM

FWIW, went down to the basement library this AM, and came back sort of empty handed. I still have Delco Remy parts breakdown books from the store I worked at through 1981. Starter listed for a 1962 409 shows number 1107233. Breakdown book says see page 52F. Page 52F is missing in action. No biggie. I'll look for other starters that used similar snouts. Page 52L is also MIA. OK, I still have a lot of Chevrolet parts books I saved from my mispent youth. The pivot bolt part number is 1932197. If the pivot is the pin and snap ring type, the part number is 1945804. I looked for restored 1107233 starters and find them with both types of pivots. I'm afraid to look any further. Someone must have saved pictures of original 1962 409 four speed cars that show those details.

**Bill Pritchard** · #17 07-18-2023, 06:24 PM

Here we are, missing Verne again

**Xplantdad** · #18 07-18-2023, 07:34 PM

Quote:

Originally Posted by Bill Pritchard

Here we are, missing Verne again

Yep

**McCune** · #19 07-18-2023, 09:32 PM

This is the special Delco bolt. It is 100% correct for the 1962 starter in question. I nerd out on stuff like this and it happens to be my every day wheel house. I do respect others opinions.

**RPOLS3** · #20 07-19-2023, 01:02 PM

Quote:

Originally Posted by McCune

This is the special Delco bolt. It is 100% correct for the 1962 starter in question. I nerd out on stuff like this and it happens to be my every day wheel house. I do respect others opinions.

Is this the bolt that goes through the bellhousing? What about the other 2?

Please PM me if for sale.

Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

The Following User Says Thank You to McCune For This Useful Post:
RPOLS3 (07-18-2023)

The Following 2 Users Say Thank You to Bill Pritchard For This Useful Post:
dykstra (07-20-2023), RPOLS3 (07-18-2023)

The Following User Says Thank You to RPOLS3 For This Useful Post:
dykstra (07-20-2023)

The Following 3 Users Say Thank You to John Brown For This Useful Post:
dykstra (07-20-2023), olredalert (07-19-2023), RPOLS3 (07-18-2023)

The Following 3 Users Say Thank You to Bill Pritchard For This Useful Post:
dykstra (07-20-2023), PeteLeathersac (07-19-2023), RPOLS3 (07-18-2023)

The Following User Says Thank You to Xplantdad For This Useful Post:
RPOLS3 (07-18-2023)

The Following 4 Users Say Thank You to McCune For This Useful Post:
69M22Z (07-19-2023), dinograz (07-18-2023), olredalert (07-19-2023), Xplantdad (07-19-2023)

Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars.