62 Corvette 327-340hp

[Nasblu]

Beautiful can't beat a good original 62 Corvette. Here is our 1962 Original Fuelly 26K original miles all original except one old Lacquer repaint in 1972 and the vintage rocket RPM wheels

[napa68]

Originally Posted by Nasblu

Beautiful can't beat a good original 62 Corvette. Here is our 1962 Original Fuelly 26K original miles all original except one old Lacquer repaint in 1972 and the vintage rocket RPM wheels

That gives me urges

[olredalert]

Originally Posted by Nasblu

Beautiful can't beat a good original 62 Corvette. Here is our 1962 Original Fuelly 26K original miles all original except one old Lacquer repaint in 1972 and the vintage rocket RPM wheels

----This is the way a 62 should be be set up as far as I'm concerned. Love the wheel and tire combo. That puts your 62 over the top for me....Bill S

[scuncio]

Originally Posted by Nasblu

Beautiful can't beat a good original 62 Corvette. Here is our 1962 Original Fuelly 26K original miles all original except one old Lacquer repaint in 1972 and the vintage rocket RPM wheels

Looks perfect, can you share the tire sizes?

[Nasblu]

They are 670-15 tires.

[napa68]

While the transmission took a bit longer than anticipated, it is done and on the way back. I should have it Monday. The blocker rings on 2nd and 3rd were toast, and the front bearing was not all to healthy. 2nd gear itself did not look too bad, but elected to replace it with an NOS unit. Surprisingly, the shafts were MINT! Tom expressed some concern over that if the car was used as intended. With a little luck, this should be back in service EOD Monday, or Tuesday morning.

I still see spots of undercoating I forgot how much Tom likes to use gasket sealer to dress the gaskets. At this point, what's a little more clean up work??