Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

Thanks Patton, I will check soon and post pictures.

I did check and saw slotted bolt holes where I assume the fan shroud was mounted.

Ryan

[70post]

Sounds good .... just figured I would check as I've seen info in the PIM (aka Assembly Manual) that for some other years talks about two HD radiators...both a HD 3 row and the HD 4 row.

As Luke stated - your car would use the 402995 shroud. It's the same shroud used on the 1970 cars. In '71 they made some changes to the shroud with some extra bracing molded into the outside surface of it. So, go with a 402995 if you need one and you're good to go in the fan shroud dept.

Some aftermarket radiators can be problematic when it comes to fitting them into the factory metal "saddles"/brackets that hold the top of bottom of the end tanks on both ends of the radiator. In that regard the best bet is to use original Harrison tanks as the basis for any radiator build. I would also avoid using any repro radiator saddles/brackets...again, possible fitment-to-end-tank problems. You already know that story....stick with good original stuff whenever possible.

[Ryan1969Chevelle]

Thanks again Patton, I will look into the rad a little deeper next week:-)

Ryan

[Ryan1969Chevelle]

Had the chance to visit Bill Stephenson (Olredalert) and looked at a couple "nice" cars we had such a nice visit. Also proud to sell one of the oddball tires so Bill has a perfect old spare for a W-machine he is restoring.

"Nice" = understatement of the century:-)

Such a nice welcoming couple, hope to see you both again soon!

Ryan

This allowed me to keep one original rim separate to figure out the codes

[Postsedan]

More wheel pictures [img]<<GRAEMLIN_URL>>/no.gif[/img]

Dan

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Postsedan</div><div class="ubbcode-body">More wheel pictures [img]<<GRAEMLIN_URL>>/no.gif[/img]

Dan </div></div>

Yes!!

PS: I need one wheel, with these codes. I have three originals and two black wheels, same size but I would like 4 correct ones!

Ryan

[Ryan1969Chevelle]

Here is a bucket list item ticked off my list!!

I have always wanted my muscle car in a car mag, just never imagined this could be possible.

As I have said before, I made a decision on my 40th birthday to get involved in our hobby/passion and have not looked back!!

Phoned my parents to share my excitement with Mom and Dad, happy guy here!!!!

Ryan

[RPOLS3]

Read mine last night - congratulations! [img]<<GRAEMLIN_URL>>/beers.gif[/img]

[cook_dw]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ryan1969Chevelle</div><div class="ubbcode-body">
Here is a bucket list item ticked off my list!!

I have always wanted my muscle car in a car mag, just never imagined this could be possible.

As I have said before, I made a decision on my 40th birthday to get involved in our hobby/passion and have not looked back!!

Phoned my parents to share my excitement with Mom and Dad, happy guy here!!!!

Ryan









</div></div>


I was flipping through MCR this past weekend and saw the article. Very cool and congrats!!

[454_Malibu]

Very Nice, Congrats. My issue must be in the mailbox now.