|
|
|
#1
09-19-2024, 08:07 PM
|
|||
|
|||
Dash carrier resto
is there still anyone restoring the original 69 camaro dash carriers
|
|
#2
09-19-2024, 09:26 PM
|
|||
|
|||
|
Just my 2¢ from 49 years of '69 Camaros. I wouldn't bother. Originals were brittle 20 years ago; wiper switch pegs and the lower trim cover tabs usually broken off.
There have been two repros available for some time, both well-done.
__________________
Learning more and more about less and less...
|
| The Following 4 Users Say Thank You to William For This Useful Post: | ||
|
#3
09-19-2024, 11:05 PM
|
|||
|
|||
|
Check with Mike at Instrument Specialties
|
|
#5
09-20-2024, 01:00 PM
|
||||
|
||||
|
I used Polyvance Plastifix to rebuild the bottom of the radio opening and knobs where it had been cut out. It also worked great on a cracked wiper switch stud, and a missing tab.
https://www.polyvance.com/PlastiFix-Kits-1/2503/ The steps for reconstructing a tab are shown in this vid Their website has videos for other types of repairs. Pictures of mine below. Using the molding putty to rebuild this wallowed out radio knob hole Studs are easy. Platifix can be applied in layers to reinforce these also. The area where the bottom of the radio opening was cut out was also repaired using the molding putty. Radio opening rebuilt, knob holes filled, and new tab added
__________________
Rob 1969 Camaro Z/28. Norwood 02D. Lemans Blue
|
 |
|
|
Linear Mode
