L78/L71/L72/LS6 143 "blueprint" camshaft interest?

[Chevy454]

[ QUOTE ]
I have a question.
is this a one time deal or are they going to continue to make these?
and who makes the EDM lifters?

[/ QUOTE ]
Both the regular solids and the edm lifters are Johnson lifters.

And as of now, I think we're gonna have a cut-off date of around next Wednesday (4/29) on this "group buy"...since there's power in numbers, we're saving somewhere around $40/cam, $20/solids and $30/edm...we'll more than likely be able to get someone a cam or two down the road, but I'd say the price will be quite a bit higher.

[1968 nova ss]

thanks Rob and Jim.I appreciate you guys stepping up to the plate with bullet Cams and gettin er done.chris

[68 Chevy II]

Rob, Paypal and pm sent. I BIG Thank You to yourself, Jim Lerum, and board members for making it happen!! Tony

[LS6 RAT]

Rob,

I would like a cam & lifter set. I will send by mail to the club address a check for $165 & $73 combined.

Thanks, Warren

[JLerum]

If that is what it takes to make Chevrolet's continue to rule than I wouldn't imagine doing it any differently.

For those of you that think this is bad timing and are in an economic freeze, we can revisit it in 6 months or a year and see if we can set up another group deal. I would like nothing better than to think we have some future business down the road that will accommodate people in need.

Jim

[JLerum]

[ QUOTE ]
thanks Rob and Jim.I appreciate you guys stepping up to the plate with bullet Cams and gettin er done.chris

[/ QUOTE ]

Thanks guys! It's intended to do as the license plate from long ago said *****USA-1*****. In a nut shell, it will keep our cars running super strong on American made products built by our fellow country men. I feel you have invested in quality pieces that are very reputable. From cam cores to the Johnson lifters, it's good stuff.

When you get your product in the mail in 10 days or so, please open the packages and inspect what you have. I just received one of the soon to be few remaining L-88 crane camshaft that was bought for a fellow Canadian and it was broke in 1/2 from poor shipping and handling practices. I truely want this to be good for everyone!

Jim

[JoeG]

Thanks guys for the follow-up and leg work on this project....Joe
Payment sent out today for (1 cam & 1 set of solid lifters(standard type)...

[ktc427]

Hi Jim, I'm in for one! <font color="yellow"> </font>

[Chevy454]

I have the following guys on the list as interested, but need a confirmation as to whether you're in or out:

Steve Antonucci
Mark Ogren
Zach Carter
Sam Besser
Chuck Sharin
Michael Pomeroy
Steven J
Scott Kiehne
John Spiegelberg
Mark Lenhard

No big deal either way, just need to tie up the loose ends in the next couple of days...

[Chevy454]

Also, current list is below, as well as in original post...everyone double check it!

<u>CONFIRMED - as of 4/28/2009</u>

<font color="red">
*Ken Tibor - cam + solids</font>
*Jeff Connor - 2 cams
*Greg Roberts - cam + edm
Peter Simpson - cam
*Dustin R Vine - 2 cams + 1 solid + 1 edm<font color="red">
*Dave McCutcheon - 2 cams + 1 solid + 1 edm</font>
*Nils Julin - 1 cam
*Jim Sullivan - 1 cam
*Greg Simmons - 1 cam
*Donnie Cornelis - 1 cam + solid
*Tom Howard - 1 cam
*Philip L Soucy - 1 cam + solid<font color="red">
Joseph Guerra - 1 cam + solid
*Ed Lis - 1 cam + edm</font>
*Grady Burch - 1 cam + solid
*Tony Wonch - 1 cam + edm
*Tony Ragla - 2 cams + 2 edms
Jim Weaver - 1 cam + solid
*Elon Block - 1 cam
Warren Friedrich - 1 cam + solid
Chris White - 6 cams + 2 edms
Jim Lerum - 1 cam

<font color="red">(NOTE: priority shipments are in RED</font>, confirmed payments denoted by *)