Ryan Weaver's 1969 Olds Cutlass S W31 Club Coupe

[Ryan1969Chevelle]

I haven't even seen the examples at their facility yet so I won't rule them out. I can't sneak away to tour their facility till the new year.

Dan's vendors are not right around the corner for me:-( that would be too easy!!

I will find a pitted piece of metal for them to powder coat and see how it comes out and go from there.

Ryan

[Ryan1969Chevelle]

http://www.hotrod.com/how-to/chassis...-coat-a-frame/

Good info here.

Ryan

[Postsedan]

The team at Muscle Car Restorations in Chippewa Falls, WI. does great work....They usually always have a car or two at MCACN.
My powder coater does a lot of the same as in this article.....just as he
does the front rotors....I have him do the same with the rear drums.....again this is more for the driver car....but I have also used the same procedure with judged cars....no point deductions. I like to eliminate the possibility for any and all rust ever returning. Not an easy task. This article is 100% correct it is ALL IN THE PREP WORK!


Dan

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Postsedan</div><div class="ubbcode-body">The team at Muscle Car Restorations in Chippewa Falls, WI. does great work....They usually always have a car or two at MCACN.
My powder coater does a lot of the same as in this article.....just as he
does the front rotors....I have him do the same with the rear drums.....again this is more for the driver car....but I have also used the same procedure with judged cars....no point deductions. I like to eliminate the possibility for any and all rust ever returning. Not an easy task. This article is 100% correct it is ALL IN THE PREP WORK!


Dan

</div></div>

I have printed out all the pages (And all the pics from the green Chevelle) so I have some reference as I pick a powder coater.

Ryan

[Postsedan]

Why am I not surprised [img]<<GRAEMLIN_URL>>/headbang.gif[/img]

YOU WILL FIND THE RIGHT Powder Coater.....and have a beautiful original frame.

Dan

[Ryan1969Chevelle]

Dad picked up a tow bar and lights, and a couple carts to move items around.

Early before work I will measure up to make brackets to mount to the frame.

Ryan

[Postsedan]

How far is it from the Igloo to the house [img]<<GRAEMLIN_URL>>/hmmm.gif[/img]

Dan

[The Dude]

If it was me Id find a friend with a trailer.

[RamblerDealer]

Ryan, I'm a new member here and just reading your thread. Great project, next time you have to move the chassis or the body let me know. I live 2 miles away from you, have a flat-bed/tilt and load and would be happy to help you.

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: RamblerDealer</div><div class="ubbcode-body">Ryan, I'm a new member here and just reading your thread. Great project, next time you have to move the chassis or the body let me know. I live 2 miles away from you, have a flat-bed/tilt and load and would be happy to help you. </div></div>

Hello Terry.

Welcome to the site, there is little to no drama here and so many great car guys!!!

I have a prediction you own a Post Sedan Rambler Drag car...........I have seen it at the show on Main Street but couldn't find the owner anywhere.........

Your offer to help out with your tilt load truck is very generous, very Canadian of you!!!

Ryan

PostSedan (Dan) is my good friend, he always has my back!!! He is a giant so I like having him on my side:-)