|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
I'm using KYB Gas-Adjust mono-tube shocks, and the car has the rear lower frame braces along with boxed lower control arms and the rear anti-sway bar. And as I've mentioned it has all new Moog control arm bushings. Car is not jacked-up and the lower control arms set fairly level. Car has stock rear coil springs from a 1970 SS Chevelle - I mentioned earlier in this thread that the car had extra tall and awful stiff springs in it when I got it. Some people though that was because of the slicks that must have been used on it at some time in the past.
But whatever - I'm experiencing wheel hop and it must be stopped. Right now I need to get the pinion leak stopped. All the new parts have arrived so I've got to get the mechanic to give me a date to bring the car. |
#2
|
||||
|
||||
Order the stop hops now and have them on hand for when you can get the car in for the pinion. Get the bars installed at the same time ..
__________________
Mitch 1970 Chevelle SS 1966 Chevelle SS 1967 Camaro ss/rs 1938 Business coupe, street rod 2000 FXSTS, original owner, 13k miles |
The Following User Says Thank You to Too Many Projects For This Useful Post: | ||
TomN (09-25-2023) |
|
|