|
|
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
#231
02-17-2023, 07:43 PM
|
||||
|
||||
1970 L-78 Nova Restoration; Saga of The Green Bastard
Headliner continued...
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22 
|
| The Following 7 Users Say Thank You to L78_Nova For This Useful Post: | ||
big gear head (02-18-2023), dykstra (02-19-2023), napa68 (02-17-2023), NorCam (02-18-2023), olredalert (02-17-2023), x77-69z28 (02-18-2023), Xplantdad (02-18-2023) | ||
|
#233
02-23-2023, 05:49 PM
|
||||
|
||||
|
1970 L-78 Nova Restoration; Saga of The Green Bastard
Package tray and sail panels..
Well first a little distraction to polish out a small stray scratch I noticed while climbing around up there. I took some of the pictures after I had prepped to install the rear glass. Ended up having to wait some time for a new rear glass because all my old originals were a little scratchy. I had several pairs of originals (and repops) to choose from but nothing was good enough shape or matched the headliner close enough for my liking. So I stripped the fabric and recovered the originals with the material supplied with the headliner (Legendary) Another example of NOTHING takes five minutes... Left side. The little wrinkle in the upper corner of the headliner required pulling it apart at the back, removing the tack strips and modifying them to lay flatter. wrinkles are gone now. Right Side. Same wrinkle, same rework It would be a good idea to remove that tape along the back edge before installing the back glass... ask me how I know 
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22
|
|
#235
02-23-2023, 06:21 PM
|
||||
|
||||
|
1970 L-78 Nova Restoration; Saga of The Green Bastard
A few odds and ends
Park Brake and Pedals Speedo cable and clips Rag joint. Tape on box shaft is the rotational center for reference with alignment/tie rod ends. Heater core cover and wiring clips
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22
|
|
#236
02-23-2023, 06:29 PM
|
||||
|
||||
|
1970 L-78 Nova Restoration; Saga of The Green Bastard
Chrome is back...
Door handles and air cleaner lid... Bare bones... Plus some parts for my 70 Chevelle Man Chrome hurts now !!
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22
|
| The Following 2 Users Say Thank You to L78_Nova For This Useful Post: | ||
big gear head (02-23-2023), Xplantdad (02-23-2023) | ||
|
#238
02-23-2023, 07:20 PM
|
||||
|
||||
|
Quote:
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22
|
|
#239
02-23-2023, 07:23 PM
|
||||
|
||||
|
This is the plug for where the smallblock/6 cyl heater core would exit the firewall. The factory puts that rubber plug over it from the inside. They use a piece of black tape on the surface that shows in the engine compartment. The tape is usually gone.
__________________
WOT
|
|
#240
02-23-2023, 07:59 PM
|
||||
|
||||
|
1970 L-78 Nova Restoration; Saga of The Green Bastard
Ah yes, the original tape was there but not re-useable. I replaced with similar cloth tape.
__________________
68 Acadian SS-350 auto/AC driver 70 Nova SS-396/375HP Bench Stick 72 Nova SS-350 5sp Mini Tubbed 67 Chevelle Conv. SS-427 clone 70 Chevelle SS-454 LS-5 M-22
|
|
|
|
Linear Mode
