rear brake line flexible hose mtging bolt for 69

[enio45]

working on a 69Z and wanted to find the correct bolt that holds the T block on the flexible line to the bracket that is attached
to the rear end housing. Upon doing so - I discovered a few things.....

1. it is a special bolt that has a shoulder on it
2. The org bolt (which I found at a buddy's place) does not fit in the today brake line (got mine from in line tube)

Anyone come across this before...the bolt is not listed in AMK and looks to be a one off for the car. Also - does not seem that
anyone makes this bolt with the shoulder on it and they just use a reg bolt without the shoulder.

Hope this was not to confusing...

Appreciate any input or your experience with this.

[mockingbird812]

it's not a &quot;bolt&quot;. The fastener is actually scotch tape! [img]<<GRAEMLIN_URL>>/whistle.gif[/img]

[John Brown]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: enio45</div><div class="ubbcode-body">1. it is a special bolt that has a shoulder on it
2. The org bolt (which I found at a buddy's place) does not fit in the today brake line (got mine from in line tube)

Appreciate any input or your experience with this. </div></div>

In the words of the oil lobby, Drill baby, drill.

[Enoch]

Eddie Yes I have also seen that on some cars. I had a few RSC bolts with the oversize shoulder for that application. Rich.

[enio45]

sam, im going to borrow one from your chevelle :-)

[luv2sixty9]

Ed,
The correct bolt or the norm for your Z28 should be a non shouldered bolt &quot;RSC&quot; head marking and I believe there was also a &quot;E&quot; head marking bolt. The shouldered bolt that your referencing are usally seen on Chevelles from my experience and even the bracket is different than the Camaro 12 bolt bracket.

[enio45]

Dave, thanks for the thoughts on this - I did pull one out of my low mile z and it was non shoulder bolt. However the AIM has a part number for a bolt that I cannot find a cross ref in bolt catalog....so im thinking it is special type ??

[luv2sixty9]

I'll send you a picture of a shouldered one that I have, along with the bracket to see if its the same.

[luv2sixty9]

Here is a picture of the bolt and bracket.

[luv2sixty9]

Ed,
This assembly came off a Chevelle 12 Bolt rear and not a Camaro 12 Bolt. The head marking on the bolt is &quot;CP&quot;