Vintage Certification @ MCACN 2023

[Steve Shauger]

This 67 Z28 was awarded Time Capsule. It was optioned with ultra rare cowl plenum and headers.

[olredalert]

----Would love to know if the headers on this Z are OK Custom GM part number headers?....Bill S

[Steve Shauger]

Originally Posted by Steve Shauger

This 67 Z28 was awarded Time Capsule. It was optioned with ultra rare cowl plenum and headers.

A few more pics

[HuggerSS]

Steve, amazing pictures! Do you have a picture of the header/exhaust connection?

[Canuck]

Originally Posted by olredalert

----Would love to know if the headers on this Z are OK Custom GM part number headers?....Bill S

Bill
When we inspected this car at MCACN in 2022 we found blue paint in the trunk that had transferred from the headers to the trunk floor,likely while in transit. The paint matched the headers,sio we safely concluded these were the factory supplied headers,shipped with the car.
The original exhaust manifolds were there as well, in pristine condition with about 15 inches of exhaust header pipe attached. Probably removed on day 2.
Paul

[Mr70]

......I can't stop looking at all these detailed photos.

[HuggerSS]

Thank you Steve,

[Steve Shauger]

Originally Posted by HuggerSS

This car is RPO Z283; which is factory equipped with headers.
RPO Z284; would be header/cowl plenum equipped from the factory.

Z28 with ECL BA= Z28 without either.
Z28with ECL BB= air plenum only
Z28 with ECL BC= headers only
Z28 with ECL BD= headers and cowl plenum(refer to window sticker pictured)

There were 4 Z28 ECL combination as represented above.

[Xplantdad]

Turned the window sticker for ya!

[Edgemontvillage]

Originally Posted by HuggerSS

Steve, amazing pictures! Do you have a picture of the header/exhaust connection?

Photos of the original exhaust manifolds including the heat riser and head pipe cut offs that were in the trunk when we inspected the car. They were likely delivery date take offs as the they showed no signs of any wear, dis-coloring or carbon accumulation. Note the original white-asbestos donut and (correct) clocking of the heat riser valve. I may have photos of the installed headers, will have a look.