#2
|
|||
|
|||
Look at the pics in the first post of this thread:
https://www.yenko.net/forum/showthre...d+pics+project They may be a little light. They still look the same today, seven years later. I believe I covered the procedure I used in another thread. I will hunt it up if you want.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
#3
|
||||
|
||||
After my springs were media blasted,I coated gem with a graphite spray, then assembled.
I will see if I took photos.
__________________
1971 W30 convert, triple green,second owner. 1971 W30 Convert, special order Rally red, under resto. 68 Charger R/T, Bullitt Replica 68 Camaro Z28,Corvette Bronze,Houndstooth www.vancouverclassiccars.com |
The Following User Says Thank You to Canuck For This Useful Post: | ||
enio45 (07-31-2019) |
#4
|
|||
|
|||
what brand of graphite spray did you use some pictures would be great thanks
|
#5
|
|||
|
|||
I set out some of the procedure I used starting in post #55, on that thread, I believe.
Also, found the other thread on the technique I used for the springs. https://www.yenko.net/forum/showthre...f+springs+lynn Hope that helps.
__________________
Don't believe everything you read on the internet ... Ben Franklin |
Thread Tools | |
Display Modes | |
|
|