|
|
|
#1
07-29-2019, 07:01 PM
|
|||
|
|||
Leaf spring color
what is a good color match & brand for flat cast iron paint to coat a set of leaf springs
|
|
#2
07-29-2019, 08:30 PM
|
|||
|
|||
|
Look at the pics in the first post of this thread:
https://www.yenko.net/forum/showthre...d+pics+project They may be a little light. They still look the same today, seven years later. I believe I covered the procedure I used in another thread. I will hunt it up if you want.
__________________
Don't believe everything you read on the internet ... Ben Franklin
|
|
#3
07-29-2019, 10:11 PM
|
||||
|
||||
|
After my springs were media blasted,I coated gem with a graphite spray, then assembled.
I will see if I took photos.
__________________
1971 W30 convert, triple green,second owner. 1971 W30 Convert, special order Rally red, under resto. 68 Charger R/T, Bullitt Replica 68 Camaro Z28,Corvette Bronze,Houndstooth www.vancouverclassiccars.com
|
| The Following User Says Thank You to Canuck For This Useful Post: | ||
enio45 (07-31-2019) | ||
|
#5
07-30-2019, 03:59 AM
|
|||
|
|||
|
I set out some of the procedure I used starting in post #55, on that thread, I believe.
Also, found the other thread on the technique I used for the springs. https://www.yenko.net/forum/showthre...f+springs+lynn Hope that helps.
__________________
Don't believe everything you read on the internet ... Ben Franklin
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
