|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wire harness clip source
My original harnesses have a couple of broken push clips - the kind that are taped into the wire bundle. Is there a good source for the correct color / size clips? It looks like most new harnesses have white clips which I believe are incorrect.
__________________
SOLD 1969 427 COPO Camaro Lemans Blue/Black, M22 4 speed, 15,800 original miles |
#2
|
||||
|
||||
yes, white is incorrect - I know of no source currently but was thinking about having 1000 or so made - cost is about $600 so .60 each.
There are 2 which really should be made the a DARK BROWN one with the split retainer pins on a tab and a BLACK or DK BROWN one with the split retainer pins on the back of the part which is woven into the harness - I thought about painting the repros but then pushing through a hole would scrape off the paint.
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos |
The Following 3 Users Say Thank You to firstgenaddict For This Useful Post: | ||
#3
|
||||
|
||||
I pulled a few harnesses from junked cars years ago. Still have them and have used connectors and a few push clips from them.
|
|
|