L78/L71/L72/LS6 143 "blueprint" camshaft

[Chevy454]

[Note: the old thread was getting bulky, so I tidied everything up in this one. RTC]

Any of you L78/L71/L72/LS6, big block Chevy guys have any interest in a '143' blueprint camshaft? Immediate or otherwise??

Due to Crane's recent bankruptcy, we're looking into the feasibility of a high quality '143' camshaft to fill the void...whether it be for restoration or high performance [Pure Stock, street/strip, etc], this cam should fit the bill. Do a quick search on this site about the performance of the GM/Crane 143 camshaft, and you'll see why it's absence leaves a lot of us scrambling for a replacement...all so called 143 "blueprint" camshafts are not created equal!

I know a couple of guys are in the middle of engine builds as I type this, so if anyone else is gonna be needing one shortly, *please* send me a private message ASAP. But, if there is any other future interest, please reply...PRICING & PAYMENT INFO BELOW!!!!

------------------------------------------------------

<u>Cam:</u>
$150 + $15 s&amp;h

Cam will be an Engine Power cam core, which is Made in the USA and supplies cores to all of the big companies, and then Bullet Cams will CNC grind it to exact specs, which not even the original GM/Crane piece can claim.


<u>Lifters: </u>
standard solid lifters, $70 + $3 s&amp;h
EDM solid lifters, $165 + $3 s&amp;H

Lifters are Johnson lifters, which have been around forever, and are also Made in the USA. Again, for EDM lifters, PM me for price

We hope to start shipping these in around 10 days, and will get them out to the priority guys first...again, if you need a cam/lifters ASAP, please drop me a PM and check the list @ the beginning of the thread as I'll make a notation beside your name.

------------------------------------------------------------------------------------
For those of you comfortable with PayPal, you can use the button below, just *be sure* and make a note in the comments section of the transaction exactly what you're paying for [cam and/or lifters] along with your physical shipping address &amp; contact number:

<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<p align="center"> <input type="image" src="https://www.paypal.com/en_US/i/btn/x-click-but04.gif" border="0" name="I2" alt="Make payments with PayPal - it's fast, free and secure!" align="absmiddle" width="62" height="31"><input type="hidden" name="business" value="[email protected]"><input type="hidden" name="item_name" value="sYc and Supercar Registry"><input type="hidden" name="item_number" value="Support for the club, bulletin board, and Supercar Reunion!"><input type="hidden" name="image_url" value="https://www.yenko.net/ubbthreads/images/supercarlogo.gif"><input type="hidden" name="return" value="https://www.yenko.net/donation.htm"><input type="hidden" name="currency_code" value="USD"><input type="hidden" name="no_note" value="1"><input type="hidden" name="cmd" value="_xclick">
</form>

For those of you who prefer snail mail, you can simply send it to the club, and I'll take it from there...but as above, include a note stating *exactly* what you're paying for [cam and/or lifters] along with your physical shipping address &amp; contact number.

sYc
POB 375
Alton, MO 65606

------------------------------------------------------

<u>CONFIRMED - as of 4/29/2009</u>

<font color="red">
*Ken Tibor - cam + solids
*Tom Parsons - cam + edms
*Dave McCutcheon - 2 cams + 1 solid + 1 edm
*Ed Lis - 1 cam + edm</font>
*Jeff Connor - 2 cams
*Greg Roberts - cam + edm
*Peter Simpson - cam + edm
*Dustin R Vine - 2 cams + 1 solid + 1 edm
*Nils Julin - 1 cam
*Jim Sullivan - 1 cam
*Greg Simmons - 1 cam
*Donnie Cornelis - 1 cam + solid
*Tom Howard - 1 cam
*Philip L Soucy - 1 cam + solid
*Joseph Guerra - 1 cam + solid
*Grady Burch - 1 cam + solid
*Tony Wonch - 1 cam + edm
*Tony Ragla - 2 cams + 2 edms
*Jim Weaver - 1 cam + solid
*Elon Block - 1 cam
*Warren Friedrich - 1 cam + solid
*Chris White - 6 cams + 2 edms
*Jim Lerum - 1 cam + edm
*John Spiegelberg - 1 cam + edm
*Van K Zannis III - 2 cam + 2 edms
*Scott Kiehne - 1 cam + edms
*Frederick Eichhorst - edm
Dave Chatroop
*Bob Jenkins - 1 cam + solids

<font color="red">(NOTE: priority shipments are in RED</font>, confirmed payments denoted by *)

------------------------------------------------------

<u>NEED CONFIRMATION:</u>
Bob Jenkins
Steve Antonucci
Mark Ogren
Zach Carter
Sam Besser
Chuck Sharin
Michael Pomeroy
Mark Lenhard

[JLerum]

Those in the above post in RED print acknowledged as an "ASAP order" should have their purchases in route Tuesday morning at the latest. Depending where in the country you are, it will be 2-4 days to the door step UPS.

Jim Lerum

[kwhizz]

[ QUOTE ]
Those in the above post in RED print acknowledged as an "ASAP order" should have their purchases in route Tuesday morning at the latest. Depending where in the country you are, it will be 2-4 days to the door step UPS.

Jim Lerum

[/ QUOTE ]


Thanks........
Ken

[Steven J]

Regarding the other thread, I will hold out until the next group buy on these.

[Chevy454]

<u>SHIPPING TODAY:</u>
Ken Tibor
Tom Parsons
Dave McCutcheon
Ed Lis

Be looking for these in the mail, and *drop me a PM/email letting me know you have your purchase in hand*...a large majority of the rest of the cams/lifters should start leaving towards the end of the week/first of next week...

[Chevy454]

The very first of the GMB143 cams has made it's way to Red Bud, IL...y'all make sure &amp; either PM or email when you get these, and it would be a good idea to take everything out of the box &amp; make sure everything arrived safe &amp; sound. Things have been known to get broken in the big brown trucks...!

[kwhizz]

Got my "Package" today...................Thanks to all involved
Ken

[nuch_ss396]

I just used Paypal to transfer $333.00 for the '143 cam and EDM'd lifters ( + s&amp;h ).

Thanks,

Steve Antonucci

[Donnie]

<span style="font-weight: bold">can we get a run of these again?</span>

[TDW]

Donnie...If you are in need of one right now, I have the one I bought just sitting on the shelf. I will let you have it for my cost, or you can replace it if they make another batch. EDM lifters go with it.