#1
|
|||
|
|||
Wiring harness tape
my rear tail light harness on my 69 camaro is fine the tape is dried out what is the correct style tape to use and a source to get it from
|
#2
|
|||
|
|||
I have some that is pretty close i used it on my cars ill see if i can find some i have left
|
#3
|
|||
|
|||
ok or let me know where i can find it thanks
|
#4
|
||||
|
||||
AMK
Plastic 3/4" Part Number B-11667 1" Part Number B-11666 Friction 3/4" Part Number B-11669
__________________
69 Los Z11 68 SS/RS 396/325 68 Los Z28 |
The Following 5 Users Say Thank You to 169indy For This Useful Post: | ||
Blown32 (09-14-2024), dykstra (09-15-2024), Jims69z28 (09-14-2024), ruralrte66 (09-15-2024), X66 714 (09-13-2024) |
#5
|
|||
|
|||
tape
here is a sample of the original tape on the harness its vinyl on the out side and mesh on the inside
|
#6
|
|||
|
|||
The tape that was on my cars was a 2 side sticky tape i went through legends and they said it was correct
|
#7
|
|||
|
|||
do you have a picture of the tape you used thanks
|
#8
|
||||
|
||||
ALLZS, Wow look at this rear harness on Facebook.
Link https://www.facebook.com/photo?fbid=...71228623122319 Your Sample has, as does this removed rear the Plastic tape AND the Mesh. I reworked my 69 Pacers rear years ago and do not recall the Mesh. I know of no exact-reproduction tape out there at this time. I will peruse the 3M web site, It Certainly WAS not adhesive coated on BOTH sides.
__________________
69 Los Z11 68 SS/RS 396/325 68 Los Z28 |
#9
|
||||
|
||||
You could use this with the AMK to produce your own Tapes:
https://www.amazon.com/MILEQEE-Unive...3b75cdfd527c42
__________________
69 Los Z11 68 SS/RS 396/325 68 Los Z28 |
#10
|
||||
|
||||
I used this 1" wide cloth tape from American Autowire
https://americanautowire.com/product...tape-pm485-007
__________________
Rob 1969 Camaro Z/28. Norwood 02D. Lemans Blue |
Thread Tools | |
Display Modes | |
|
|