LS6 Low Rise Intake

Keith Tedford · #1 05-01-2014, 04:02 PM

I have an LS6 569 intake and can't find a casting date on it. It may have come from a 1973 marine engine. Any enlightenment?

**Mr70** · #2 05-01-2014, 04:04 PM

Does it have a riveted on oil splash guard underneath?

Keith Tedford · #3 05-01-2014, 04:27 PM

Yes,it has the riveted on steel shield.

**Mr70** · #4 05-01-2014, 04:46 PM

Drill it out,there should be a date under there.

**XXXGoldL34M20** · #5 05-01-2014, 04:50 PM

The Date code is under the shield. Here is a photo of mine before I put it on the engine.

I decided not to take the shield off mine to just check the date as I was confident it was original to my car anyways and did not want to re-rivet the shield back on. Once it's on the motor who will see the date anyways [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

**earntaz** · #6 05-01-2014, 05:41 PM

The only issue with cleaning them is if you were to glass bead the intake -- trash may remain under the heat shield ... I have always (and very carefully) removed the rivets and and cleaned under the shield, then reassembled.

But there are other methods to clean ...

The TAZ

Keith Tedford · #7 05-01-2014, 07:18 PM

Sand blasting or glass beading without removing the shield is just inviting disaster. Sand is deadly to the whole engine.

**Fast67VelleN2O** · #8 05-01-2014, 07:34 PM

Are the runners numbered on your manifold? If they are its 1971 and later.

Keith Tedford · #9 05-01-2014, 08:25 PM

No runner numbers and thanks for the help guys. It is appreciated.

**TDW** · #10 05-01-2014, 11:01 PM

If you do take the shield off and need new rivets, I have some that I will send you. They came straight from Chevrolet Engine Plant in Flint years ago.