|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Lakewood J BOLT Hardware
Looking for some hardware to finish a restored set
of Lakewood Traction Bar's These require the J Bolt mounting style and rear square ish clamp . And I need the 2 snubbers as well .NOS or very nice repro will work. Let me know what you have. Thanks very much. Ken Last edited by cdn454LS6; 03-01-2021 at 11:14 PM. |
#2
|
||||
|
||||
Are your bars the early 2 1/2" square or the later 1 1/2" wide rectangular bars?
|
#3
|
|||
|
|||
They are the 1 1/2" later bars
|
#4
|
||||
|
||||
Pretty sure you can still buy that hardware for the rectangular bars.
__________________
|
#5
|
|||
|
|||
The J bolt kit you need is Lakewood 20580 for the 1 1/2" bars. You will need 2 kits.
Here is a link, but price shop, many places sell them. - Warren https://www.holley.com/products/susp...rs/parts/20580 |
#6
|
|||
|
|||
Lakewood U-Bolts are number 20570. 3 1/2" center to center. Price shop these also.
- Warren https://www.summitracing.com/parts/lak-20570 |
#7
|
|||
|
|||
OK great , Thanks very much for that Warren.
I'm sure any original Lakewood hardware will look the same as Summit racing hardware. Thank you for the Link. Ken |
|
|